draining and flushing coolant out of block!?
10-28-2006, 11:52 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: USA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
draining and flushing coolant out of block!?
Anyone know where the drain plugs are for the coolant located on a b16?? It is somewhere near the oil filter?
10-29-2006, 01:13 AM
#2
Honda-Tech Member
Re: draining and flushing coolant out of block!? (93(Civic)EG6)
the drain plug to release coolant is on the front of the block underneath the motor stamp. it should be right below and to the right of the "b16a" stamp.
i think its a 19mm bolt with a washer on it.
i think its a 19mm bolt with a washer on it.
10-29-2006, 02:13 AM
#4
Honda-Tech Member
Join Date: Sep 2005
Location: charlotte, nc, usa
Posts: 2,141
Likes: 0
Received 0 Likes
on
0 Posts
not necessary. the radiator draincock is the lowest point in the system. drain -fill with distilled water-run heat-drain-fill with honda premix(add some redline if you are inclined) or 50% prestone(or something brand name) and 50% distilled water.
10-29-2006, 07:40 AM
#5
Junior Member
Thread Starter
Join Date: Mar 2006
Location: USA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nello a.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nello a. »</TD></TR><TR><TD CLASS="quote">not necessary. the radiator draincock is the lowest point in the system. drain -fill with distilled water-run heat-drain-fill with honda premix(add some redline if you are inclined) or 50% prestone(or something brand name) and 50% distilled water.</TD></TR></TABLE>
Yes it is cause i am changing my type of coolant !!! Need to completely flush it!!!
Thanks every1 for the help!
Yes it is cause i am changing my type of coolant !!! Need to completely flush it!!!
Thanks every1 for the help!
Thread
Thread Starter
Forum
Replies
Last Post
dman81
Honda Accord (1990 - 2002)
5
03-07-2005 10:19 AM
jdmspoonitr
Acura Integra Type-R
22
08-01-2002 02:00 PM
