I could do that. For the calipar that has the broken screw extractor in, could I drill and tap a hole right beside the bleeder valve? Because trying to drill through the extractor would be pretty tough
Re: can you bleed brakes through the banjo bolt? (huge230)
Those small EZ outs are worthless. They are to brittle and break, as you found out.
Don't drill and tap a new hole, use a carbide drill bit at low RPM and it will go through the EZ out with no trouble. Make sure you use some cutting oil to keep the heat down. Slowly increase the bit size until you remove most of the bleeder. Then use a tap to clean out the threads. If necessary, completly drill out the bleeder, re-tap, and use a Helicoil to repair the hole.
Necessity is the mother of invention. We can make this work.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.