Breather Hoses
#1
Breather Hoses
Hey guys I have a quick question. You know the hoses that go from the valve cover to the intake and theres another one that goes to the back of the intake manifold i think. They are like half metal and half rubber. Is it okay to change the metal hardlines to rubber or will they melt or something? Hope you understand what i am asking. Thanks!
#4
Honda-Tech Member
Re: Breather Hoses (******)
From what I understand: you're talking about #8 in this picture?
I just removed that all together and re-connected the two spots with one of the rubber hoses attached to #8.
I just removed that all together and re-connected the two spots with one of the rubber hoses attached to #8.
#5
Re: Breather Hoses (gabebauman)
exactly i was talking abt number 8. how part of it was metal and some was rubber. Ok thanks for the help because i think it will look much better with rubber instead of the metal. also where did u get the exploded view?
#6
Honda-Tech Member
Re: Breather Hoses (TurboEM1)
Trending Topics
#8
What is the second hose for? im going to be doing the same thing....getting rid of the metal and rubber thing (#8) and putting two different hoses in its place. So what is the second hose for? no the one hooked from the intake to the valve cover
#12
Re: (Cypher0117)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cypher0117 »</TD></TR><TR><TD CLASS="quote">there isn't coolent int it is there? because when i replace it i don't want coolent everywhere.</TD></TR></TABLE>
bump for my question answered
bump for my question answered
#16
Re: (mwieczorek43)
Sorry to bring this thread back from the dead but I cant find the correct heater hose to replace both of them. Everytime I go to a store all everyone wants to do is type **** in the computer and they cant figure it out.
Anyone know the correct size, name ect so i can get this? Thanks a lot!
Anyone know the correct size, name ect so i can get this? Thanks a lot!
#17
Honda-Tech Member
Re: (TurboEM1)
yes top one goes to the air intake, and the one connected below it is a coolant line.
i just put a breather filter on my valve cover and took off that metal piece, the rubber hose that connects to the metal piece is long enough to reach the other end, so you can just loop it
i just put a breather filter on my valve cover and took off that metal piece, the rubber hose that connects to the metal piece is long enough to reach the other end, so you can just loop it
#18
Honda-Tech Member
Re: (TurboEM1)
When you ask for a heater hose you're asking for something completely different. What you need to do is just pull some of the same diameter rubber hose off a reel and cut off the length you need. They have universal rubber hose in different diameters on reels in every parts store. I think the rubber hose I got says "fuel" on it. Oh well it doesn't seem to matter.
Thread
Thread Starter
Forum
Replies
Last Post
Wazup
Honda Civic / Del Sol (1992 - 2000)
4
06-28-2019 09:33 AM
93grayeg
Honda Civic / Del Sol (1992 - 2000)
11
02-27-2012 09:28 PM