b20b with a b16a2 head
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Housotn, Texas, Harris
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
b20b with a b16a2 head
ok so yester day i decided to switch out the head cause the stock head had a valve tap and was driving me crazy drop in the new head my question is at what position does the timing should be and also i was running a p75 ecu and it run great now that i got the vtec head im going to use the p2p cause it had vtec any other segustion in how im running this set up
#3
Re: b20b with a b16a2 head (johnnydelcampo)
just set the timing a few degrees advanced for now til you either get a timing light or a tune, but dont just leave it at that. And second...what is a p75 ecu? out of what car? i would suggest running either a p72 or a jdm p30 with a Hondata setup, but p72 are kinda hard to come by recently.
#4
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Housotn, Texas, Harris
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: b20b with a b16a2 head (circuitEG6)
well i mess around with the wires today and it runs hella better now and a p75 from a 98 ls and yeah im getting the p2p ecu chip for now and tune too oh yeah thanks for the bump
#5
B*a*n*n*e*d
Join Date: Jun 2008
Location: Union mills, in, usa
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Re: b20b with a b16a2 head (viperboyjj)
ur gonna [freak] up that head i think, because the pors for oil flow are different from that off an ls. thats why they make that oil feed kit or some **** for cr-vtec
Thread
Thread Starter
Forum
Replies
Last Post