b16a head gsr block
#2
Honda-Tech Member
Join Date: Dec 2004
Location: Eastern NC, USA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a head gsr block
gsr head = small combustion chamber
b16 head = larger combustion chamber
so a b16 head on a gsr block would lower the compression compared to a stock gsr motor so you would be slower than a stock gsr but not sure how it would compare to a stock b16
b16 head = larger combustion chamber
so a b16 head on a gsr block would lower the compression compared to a stock gsr motor so you would be slower than a stock gsr but not sure how it would compare to a stock b16
#3
Honda-Tech Member
Join Date: Apr 2008
Location: Honolulu, Hawaii
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a head gsr block
it will lower the compression ratio from stock GSR's 10:1 to around 9.8:1.
you will DEFINITELY feel an increase in torque. You may make a little less than a stock GSR in power though. I am currently running this setup in my car.
you will DEFINITELY feel an increase in torque. You may make a little less than a stock GSR in power though. I am currently running this setup in my car.
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2009
Location: watertown ny
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a head gsr block
well ive never seen a all motor b16 with more than 210whp (fully built), and with the people ive seen with the gsr bottom ends have gotten the cars up to 230+ (fully built)with the gsr bottom end. thats why i was curious
#5
Crazy Honda Guy
Thread
Thread Starter
Forum
Replies
Last Post
xxnuttybarxx
Honda Civic / Del Sol (1992 - 2000)
3
10-25-2007 01:04 PM
92eh3si
All Motor / Naturally Aspirated
5
07-04-2004 08:53 AM