Help with fender/door on 96 ek
#1
Help with fender/door on 96 ek
well i recently bought a 96 ek with the front end of a 99-00. well long story short i want to get new fenders and a door, (also came with a different door). which year of fenders would i have to get, a 99-00 right? and also what door should i get. if this is posted in the wrong place can someone direct me where i should post this, thank you .. ohh and what would be the best thing to do to get that dent near the door?
heres some pics just incase..
heres some pics just incase..
#3
R.I.P. Mark
iTrader: (1)
Join Date: Jan 2008
Location: Melbourne, Australia
Posts: 1,377
Likes: 0
Received 2 Likes
on
2 Posts
Re: Help with fender/door on 96 ek
a facelift conversion is the following parts from EK99-00 hood, fenders ,headlights, grill ,bumper, Rad support panel but rad support panel is optional..
ALL other panels are the same just EK 96-00
O2 sensor it will not pass smog as the ECU dont know if the car is running rich or lean
its an easy fix just replace it disconnect your battery when you doing it to allow the ECU to reset
ALL other panels are the same just EK 96-00
O2 sensor it will not pass smog as the ECU dont know if the car is running rich or lean
its an easy fix just replace it disconnect your battery when you doing it to allow the ECU to reset
#4
Re: Help with fender/door on 96 ek
a facelift conversion is the following parts from EK99-00 hood, fenders ,headlights, grill ,bumper, Rad support panel but rad support panel is optional..
ALL other panels are the same just EK 96-00
O2 sensor it will not pass smog as the ECU dont know if the car is running rich or lean
its an easy fix just replace it disconnect your battery when you doing it to allow the ECU to reset
ALL other panels are the same just EK 96-00
O2 sensor it will not pass smog as the ECU dont know if the car is running rich or lean
its an easy fix just replace it disconnect your battery when you doing it to allow the ECU to reset
#6
Honda-Tech Member
Join Date: Sep 2011
Location: Western NYS
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with fender/door on 96 ek
You could fix that dent with a stud welder and slide hammer I'd bet. It is hard to tell without a good picture of it however.
Thread
Thread Starter
Forum
Replies
Last Post
CYM19z
Honda Civic / Del Sol (1992 - 2000)
1
07-09-2005 09:34 AM
Options
For Sale
15
02-15-2005 10:22 PM