deadline

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D!6EG &raquo;</TD></TR><TR><TD CLASS="quote">

x2</TD></TR></TABLE>

x1000

Civic082382

bump

Ep1dem1c

bump?? why the link is already in the post

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Thizzed Out
&raquo;</TD></TR><TR><TD CLASS="quote">http://www.cardomain.com/ride/278372/6</TD></TR></TABLE>

there it is

BlackoutVTi

As far as front end conversions for the EG's I'd have to say JDM ITR front doesn't look bad IMHO, and it may be worth looking into, if you are doing this for YOU. Can't be mad if it's JDM y0 right? lol

Ep1dem1c

streetconcept.com sells a direct bolt-on kit for the EG for the DC heads minus radiator support welding

The_shim

see, im gunna be original and put a Ridgeline front end no my EG!

Ep1dem1c

I'm putting a Fit front end on my EG....

Libertariat

Ridgeline front on any car would look bad-***!!

brmiddle

put this on and be the envy of all your friends~~2008 E350 Van!!

TEAM JDM-P

ok this is getting out of hand what about a S2000 front on eg lol or a elemet rear or ek thats sexy....

My_EFsedan

it looks nice if done right..my buddie cut off part of his fender and the ek fender lined it up and weld..all those other things...its alot of work


heres some pix of other pix of other peoples cars (sry using for examples.)

Ep1dem1c

The red one looks nice....

I had an EG with an EK front end awhile back but got rid of it because it had a lot of problems. The front end was very nicely done... the rest of the car was crap.

JShull

I don't think it looks that bad when it's done right. It just takes a good body guy who has a good eye when cutting and welding stuff back up.

nxvictim

if u do the conversion right and not put gay body kits on it it will look good i think i saw it at HIN some guy had it done and it looked good. im pretty sure that you will have to get the rad support off a ek

deepbluerocket

since the body lines are different on the two cars, to make i look really smooth its going to take some bending. you might be better off just getting a body kit and modifying your front end to fit the headlights off of an ek. going all the way will be expensive to do right and if thats what you are looking for is expensive originality, you may as well pirate a convertable top off of a pt cruiser, cut it down and make yourself a drop top if anyone has ever seen that they get a cookie.

mustang5.slow

that's some sick ******* shie t.

Ya Digg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D!6EG &raquo;</TD></TR><TR><TD CLASS="quote">WHY?!?!?!?! </TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D!6EG &raquo;</TD></TR><TR><TD CLASS="quote">

x2</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by deadline &raquo;</TD></TR><TR><TD CLASS="quote">

x1000</TD></TR></TABLE>
x1000000000

Ya Digg

why

Ya Digg

dont

Libertariat

I hate it when I'm not sure as to what car I'm looking at.

spoolin_eg

im pretty sure within the past like 3 months in honda tuning they put a 00 front clip on a 96.... thats not an eg but maybe that would give you some help if u were able to get your hands on that issue. as for the idea... i think its sick

Striker_1818

ricer

soft_V-TEC

some guy down from my house has a 97 frontend on an eg his looks pretty bad though whoever did the work sucks im sure if you have it dont right i would look bad

civicdx860

i am going to do the 2000 ek front end on my coupe just wanted to know on both fenders eg/ek do i cut the end where my front corner light are on my eg fender and cut the end off the ek fender where the end of the head light weld them together?