Notices
Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

[FAQ] How-To Prevent Your Doors From Rusting w/ Pics!

Thread Tools
 
Search this Thread
 
Old 04-03-2005, 10:45 PM
  #1  
Honda-Tech Member
Thread Starter
 
Fuster_Cluck's Avatar
 
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes on 0 Posts
Default [FAQ] How-To Prevent Your Doors From Rusting w/ Pics!

Doors rust out because moisture is trapped inside the door. There are drain plugs (4-6) on the bottom of each door that allow the exiting of water when it rains. This avoids moisture build-up, keeping rust free doors. Problem is these drain holes become clogged with debris and then the problem starts. To prevent this you should annually take a wire coat hanger and run it through each drain hole.

CONFIRMED WITH PICS

My broke down a$$ (hernia surgery this past wednesday) got outside and washed the entire car down so my bro could apply the compound and wax. Paint has looked really nasty since he wet sanded it. Now it's like showroom paint again

EK's have 4 approximately 1/2" Wide X 1/4" high holes that allow water drainage from the doors. In my drivers door I found leaves, crud, a little electronic motor of some type (seperate thread coming for it), dirt, and grime. Since my door panel had been off for over a month I just laid the water hose inside and let it do 98% of the work.....

Anyhow, took some pics for you guys.....







I think this is worth a thread of it's own if true.

Saw on the speed channel a detailing tip.


Modified by Hybrid93Hatch at 8:33 PM 4/4/2005


Modified by Hybrid93Hatch at 8:36 PM 4/4/2005
Old 04-04-2005, 12:15 AM
  #2  
B*a*n*n*e*d
 
mikehawkBUiLT's Avatar
 
Join Date: Apr 2004
Location: city of angels
Posts: 4,514
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (Hybrid93Hatch)

i never seen drain holes on the bottom of my doors
Old 04-04-2005, 01:02 AM
  #3  
Junior Member
 
JDM H23A's Avatar
 
Join Date: Feb 2005
Location: Batavia, IL, United States
Posts: 468
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (mikehawkBUiLT)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mikehawkBUiLT &raquo;</TD></TR><TR><TD CLASS="quote">i never seen drain holes on the bottom of my doors </TD></TR></TABLE>

Trust me...they're there! They're like rectangular slits...the same place where you apply rustproofing on new cars
Old 04-04-2005, 01:29 AM
  #4  
Honda-Tech Member
 
HalfAnP's Avatar
 
Join Date: Jun 2004
Location: I put on my robe and wizard hat, NY...err Bay Area--->Texas
Posts: 309
Likes: 0
Received 9 Likes on 4 Posts
Default Re: Preventing door rust.... Anyone confirm this? (JDM H23A)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM H23A &raquo;</TD></TR><TR><TD CLASS="quote">

Trust me...they're there! They're like rectangular slits...the same place where you apply rustproofing on new cars </TD></TR></TABLE>
Old 04-04-2005, 08:20 AM
  #5  
Honda-Tech Member
 
flood's Avatar
 
Join Date: Dec 2004
Location: Greeley, co, USA
Posts: 635
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Preventing door rust.... Anyone confirm this? (HalfAnP)

Motorweek! Saw the same thing.
Old 04-04-2005, 08:21 AM
  #6  
POE
Honda-Tech Member
 
POE's Avatar
 
Join Date: Aug 2003
Location: Colorado
Posts: 3,905
Likes: 0
Received 0 Likes on 0 Posts
Default

are civic doors drain water out just fine.
Old 04-04-2005, 08:23 AM
  #7  
cool guy name
 
Sehc Tib Alli Zerif!!!!!'s Avatar
 
Join Date: Nov 2004
Location: not walker111 do a search hoes
Posts: 3,873
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (POE)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">are civic doors drain water out just fine. </TD></TR></TABLE>
Old 04-04-2005, 09:05 AM
  #8  
Honda-Tech Member
Thread Starter
 
Fuster_Cluck's Avatar
 
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (flood)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flood &raquo;</TD></TR><TR><TD CLASS="quote">Motorweek! Saw the same thing. </TD></TR></TABLE>

Yes, that was it.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">are civic doors drain water out just fine. </TD></TR></TABLE>

Are you trying to ask a Q or making a statement

PS &lt;&gt; If I am able to get out to clean my car today I'll post pics. Still a little sore from surgery and all the walking I did yesterday

Old 04-04-2005, 10:01 AM
  #9  
Honda-Tech Member
 
hndakd's Avatar
 
Join Date: Jan 2004
Location: cincy, oh
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (Hybrid93Hatch)

my ek has em, didnt know they were there til somebody pulled off my door handle and i had to replace it.
Old 04-04-2005, 11:17 AM
  #10  
Honda-Tech Member
 
Farmer Brown's Avatar
 
Join Date: Aug 2003
Location: P0rnfield, Iowa, USA
Posts: 1,372
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (hndakd)

Door rust isnt the problem on Hondas. Its the rear wheel well.
Old 04-04-2005, 11:35 AM
  #11  
Honda-Tech Member
Thread Starter
 
Fuster_Cluck's Avatar
 
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (Djaric)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Djaric &raquo;</TD></TR><TR><TD CLASS="quote">Door rust isnt the problem on Hondas. Its the rear wheel well.
</TD></TR></TABLE>

to that, exactly why we need to take as many precautions as possible to prevent any rust on our babies
Old 04-04-2005, 12:01 PM
  #12  
Honda-Tech Member
 
Bond's Avatar
 
Join Date: Dec 2004
Location: B.C. Canada
Posts: 2,429
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Preventing door rust.... Anyone confirm this? (Djaric)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Djaric &raquo;</TD></TR><TR><TD CLASS="quote">Door rust isnt the problem on Hondas. Its the rear wheel well.
</TD></TR></TABLE>

Yeah, stupid fender covers. Just traps **** in there . EG's have these drain holes and Hondas don't have this problem.
Old 04-04-2005, 01:07 PM
  #13  
POE
Honda-Tech Member
 
POE's Avatar
 
Join Date: Aug 2003
Location: Colorado
Posts: 3,905
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (Hybrid93Hatch)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid93Hatch &raquo;</TD></TR><TR><TD CLASS="quote">

Yes, that was it.

Are you trying to ask a Q or making a statement

PS &lt;&gt; If I am able to get out to clean my car today I'll post pics. Still a little sore from surgery and all the walking I did yesterday

</TD></TR></TABLE>

do u see a question mark at the end of my statement???????
Old 04-04-2005, 01:12 PM
  #14  
Honda-Tech Member
 
pdiggitydogg's Avatar
 
Join Date: Feb 2003
Location: Beware Of Perverts
Posts: 12,831
Likes: 0
Received 8 Likes on 8 Posts
Default

^Doesnt matter...your statement begins with the word "Are"
Did you mean "our"?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">are civic doors drain water out just fine. </TD></TR></TABLE>
Old 04-04-2005, 01:20 PM
  #15  
POE
Honda-Tech Member
 
POE's Avatar
 
Join Date: Aug 2003
Location: Colorado
Posts: 3,905
Likes: 0
Received 0 Likes on 0 Posts
Default

O.. so i can only use Our and not are at the begin of a sentence? learn somting new everyday. im shity at grammer.
Old 04-04-2005, 01:26 PM
  #16  
Honda-Tech Member
Thread Starter
 
Fuster_Cluck's Avatar
 
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (pdiggitydogg)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg &raquo;</TD></TR><TR><TD CLASS="quote">^Doesnt matter...your statement begins with the word "Are"
Did you mean "our"?
</TD></TR></TABLE>

Thanks man

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">

do u see a question mark at the end of my statement???????</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">O.. so i can only use Our and not are at the begin of a sentence? learn somting new everyday. im shity at grammer.</TD></TR></TABLE>

Nothing but net, 2 for me lol

BTW &gt; My bro and I are supposed to hit the EK with a nice detailing 2nite. Will get pics of this once I find them

Old 04-04-2005, 01:27 PM
  #17  
POE
Honda-Tech Member
 
POE's Avatar
 
Join Date: Aug 2003
Location: Colorado
Posts: 3,905
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Hybrid93Hatch)

coo cant wait
Old 04-04-2005, 04:35 PM
  #18  
Honda-Tech Member
Thread Starter
 
Fuster_Cluck's Avatar
 
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (POE)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">coo cant wait</TD></TR></TABLE>

Original post updated / pics posted!

Maybe the mods can change the thread title to: "How-To" prevent your doors from rusting w/ pics!!
Old 04-04-2005, 05:26 PM
  #19  
Honda-Tech Member
 
Farmer Brown's Avatar
 
Join Date: Aug 2003
Location: P0rnfield, Iowa, USA
Posts: 1,372
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Hybrid93Hatch)

lol nice pics.
Old 04-04-2005, 07:13 PM
  #20  
 
civiccpedx's Avatar
 
Join Date: Sep 2004
Location: JERSEY, USA
Posts: 1,397
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Djaric)

i always wondered if all that water running through there would screw up my speakers, but so far so good.
Old 04-04-2005, 07:20 PM
  #21  
Member
 
civic_speed99's Avatar
 
Join Date: Jul 2004
Location: PA
Posts: 1,351
Likes: 0
Received 0 Likes on 0 Posts
Default

Pretty Cool
Old 04-04-2005, 08:38 PM
  #22  
 
BrianDelSol's Avatar
 
Join Date: May 2004
Location: Somewhere Nice, Midwest, America
Posts: 1,299
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (civic_speed99)

I have had surgery down there too (borken tail bone from skating, needed surgery) i am going on 3rd surgery, the week or two after is the worst ever. I didn't even want to eat, then they load me on oxy contin and i seriously laid in my bed face down for 3 days with no human contact. Surgery sucks, hope you heal well. BTW thanks for the info.
Old 04-04-2005, 09:05 PM
  #23  
Junior Member
 
stefanie's Avatar
 
Join Date: Feb 2005
Location: Austin, TX
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (civiccpedx)

the water was screwing with my speakers, so i taped plastic (from grocery bags) around all the connections. i am so broke.
Old 04-04-2005, 09:27 PM
  #24  
 
grlracer97's Avatar
 
Join Date: Dec 2004
Location: GA
Posts: 267
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Preventing door rust.... Anyone confirm this? (hndakd)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hndakd &raquo;</TD></TR><TR><TD CLASS="quote">my ek has em, didnt know they were there til somebody pulled off my door handle and i had to replace it. </TD></TR></TABLE>

I did that one night right as we parked to go clubbin'. Luckily I had just gotten the window rolled up before it broke so we didn't have to leave. Not about to park downtown with window down. For some reason my windows are hard as hell to roll up and I yanked that bad boy right off.

Anyways, nice demonstration.
Old 04-10-2005, 04:00 PM
  #25  
 
Papo240's Avatar
 
Join Date: Apr 2005
Location: GA
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: [FAQ] How-To Prevent Your Doors From Rusting w/ Pics! (Hybrid93Hatch)

Hey send me the pics


E


Quick Reply: [FAQ] How-To Prevent Your Doors From Rusting w/ Pics!



All times are GMT -8. The time now is 05:15 PM.