Replacing fuel injector
#1
Trial User
Thread Starter
Join Date: Feb 2006
Location: Cabot, AR
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Replacing fuel injector
Hello everyone,
I was hoping someone could help me out. I need to replace the fuel injector in my number 3 cylinder on a 06 Civic EX. I've never replaced an injector before so was just wondering what the process is and which is the number one cylinder on this engine. Also noticed there's not much room above where the fuel rail is located and was wondering if it's possible to do this without disassembling the plastic cowling above it. I appreciate any help or suggestions.
Thanks,
KS
I was hoping someone could help me out. I need to replace the fuel injector in my number 3 cylinder on a 06 Civic EX. I've never replaced an injector before so was just wondering what the process is and which is the number one cylinder on this engine. Also noticed there's not much room above where the fuel rail is located and was wondering if it's possible to do this without disassembling the plastic cowling above it. I appreciate any help or suggestions.
Thanks,
KS
#4
Brand New
Re: Replacing fuel injector
Hello everyone,
I was hoping someone could help me out. I need to replace the fuel injector in my number 3 cylinder on a 06 Civic EX. I've never replaced an injector before so was just wondering what the process is and which is the number one cylinder on this engine. Also noticed there's not much room above where the fuel rail is located and was wondering if it's possible to do this without disassembling the plastic cowling above it. I appreciate any help or suggestions.
Thanks,
KS
I was hoping someone could help me out. I need to replace the fuel injector in my number 3 cylinder on a 06 Civic EX. I've never replaced an injector before so was just wondering what the process is and which is the number one cylinder on this engine. Also noticed there's not much room above where the fuel rail is located and was wondering if it's possible to do this without disassembling the plastic cowling above it. I appreciate any help or suggestions.
Thanks,
KS
#5
Honda-Tech Member
Join Date: Jun 2010
Location: Orlando, FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing fuel injector
take the fuel rail off and take out the injector. watchout for the o ring at the end make sure you lubricate the injector ring before you put it back in.
#6
Trial User
Thread Starter
Join Date: Feb 2006
Location: Cabot, AR
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing fuel injector
Well I got the injector changed out, but I lost one of the clips that holds the injector to the rail. Is it ok to drive without the one clip?
#7
Honda-Tech Member
Join Date: Jun 2010
Location: cleveland/lima OH
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing fuel injector
itll prolly get u to the parts store lol try runnin it n see if it leaks or just turn the key on to get fuel pressure n check it that way
Thread
Thread Starter
Forum
Replies
Last Post
Brycen
Honda Civic / Del Sol (1992 - 2000)
2
03-18-2012 07:13 AM
davidbrookstone
Honda Accord (1990 - 2002)
6
11-11-2011 11:38 AM