bomerman19

So what have you destroyed?! Internal, External post your pics up of what you or somebody else has destroyed.










I'll start off with a couple pixs of what has gone bad on my car

sheared of timing tensioner bolt


some bent valves


when the carrier bearing goes on your diff in your trans

bomerman19

what happens when I get hungry for dust shields



what I found sitting in brian 02civicrider(on 7thgen) transmission that he just bought of some guy





do you shoot flames out of your exhaust?

Jstans84

The only thing I have destroyed from my EM2 so far is my type r front lip, it didn't so like the curb I pulled up a little too far on. I don't have any pics of it though.

bomerman19

lol I ran over my own bumper a couple weeks ago with curiousG (george) in the car he's got pics of it. It was gruesome.

lets see some more pics of what other people have done!

Maple50175

actually today i just ruined my turbo inlet line
**** and i can't find another one

looks like the line got bent, and well oil was pissing out of it . lukcy i made it home. I hope i didnt blow my turbo

Harlowe

Replaced this today.

Did this last year.

bomerman19

Ouch

burningmunk

Some dick decided he didn't like using his brakes, and instead used the car in front of him as a stopping force instead. I followed suit. (Not at fault, ambulance crossed intersection, he improperly stopped, leaving middle guy at fault)



Click them for big.

Curiouz_G

No pictures but I got a list

-Greddy Evo II exhaust smashed at the Y bend
-an accident where I crashed head onto someone in the other lane going 40mph+ while they were stopped (snow+salty roads+shitty OE Firestones)
-a couple of hit and runs
-blew out a BRAND NEW Hankook RS2 on the highway after a rock flew off a truck going 80mph+ (that was fun)
-slid in the snow going 5mph over a speed bump and slid into a curb, cost me a new LCA and axle
-hit a curb after hydroplaning going 30mph on a 35mph road due to a HUGE pothole being filled with water. cost me a LCA and destroyed my front koni's
-LCA and ball joint removal and install. took 8 hours with a saw and press (paul knows ALL about this)
-after my cam install, 4-5 times where the dam O-ring came loose where the cam is and oil kept shooting out of it for days
-tension bolt came out and rattled for a long time

I THINK thats it... Ill post up more if I think of anymore. Im sure I missed atleast a couple more but Im at work and cant think of any ATM

theciv

lifted tahoe ran over front of my car, completely moved it (look at the parking lines):








3 days after getting it from the shop, a woman on the cell phone in a SUV backs into my car...worse then it looks

chaserz

https://honda-tech.com/forums/suspension-brakes-54/04-em2-slammed-into-curb-bent-tire-2348402/

This was backwhen i first joined the forums and got my car. Obviously I didn't know much and drove like a dumbass. =]

Boilermaker1

Curiouz_G

can i has turboZ? Looks like the mid atlantic crew are king in this thread

skipbarber

iTrader: (1)

Paul, your car still acting up? I haven't had a working computer for a while and now that I do it doesn't want kmanager to work.

bomerman19

yeah it is. well I thought I fixed it I was driving one night and it went out and it backfired louder than usual it threw a code instantly and it would not start back up. checked the code and it finally threw something different than the P0300, 01, 02, 03, 04 misfire codes.
it threw a crank sensor range performance error code. I replaced the crank sensor. and it was fine for a week and then a couple of days ago after leaving george's and getting onto 66 it started acting up on me again. I am going to run the hondata stage 2 base map to see if it goes away. if it doesn't I might just replace the connector and all the wiring up to the ecu. I want to get this figured out and fixed before I go turbo.

any ideas Edwin?

GriFFIthS

What was left of my Compliance Bushing when it literally fell out

bomerman19

^WoW