Exposed wires driver side mirror replacement
08-07-2013, 06:27 PM
#1
Trial User
Thread Starter
Join Date: Aug 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Exposed wires driver side mirror replacement
My 2001 Honda civic coupe had drivers side mirror ripped off. I'm left with 3 exposed wires on outside. I bought a replacement mirror, but what kind of connector part do I need to plug into new mirror?
08-08-2013, 06:25 AM
#4
Honda-Tech Member
Re: Exposed wires driver side mirror replacement
You're gonna need molex connectors (one male and one female) plus pins and a crimper for them. Or you can direct wire it with solder and heatshrink or butt connectors.
08-08-2013, 06:48 AM
#5
Honda-Tech Member
Join Date: Nov 2007
Location: Montreal, QC, Canada
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exposed wires driver side mirror replacement
Why not just replace the Door Harness P/N 32751-S5P-A22.
It should be less than $50 online and you don't have to get any special tools.
It should be less than $50 online and you don't have to get any special tools.
08-08-2013, 06:57 AM
#6
Honda-Tech Member
Re: Exposed wires driver side mirror replacement
You can get the molex set (male and female connectors plus pins) for a couple of dollars and a good crimper is about $15 but, you can find ones that are a lot cheaper.
Thread
Thread Starter
Forum
Replies
Last Post
CeoStatus0
Honda Civic / Del Sol (1992 - 2000)
3
10-24-2007 09:44 PM
99CivicSiBrian
Honda Civic / Del Sol (1992 - 2000)
3
12-20-2005 07:28 AM