ebay fogs!
#26
B*a*n*n*e*d
Join Date: May 2008
Location: Elk Grove, CA, USA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: (D17alltheway)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D17alltheway »</TD></TR><TR><TD CLASS="quote">That is a good write up and i follow the directions but im stump on which slot to plug the ebay harness into the car harness </TD></TR></TABLE>
u if u look under there is one that is a single on that ut plugs into its on the top next the the 2 or 3 pin one ill try to find a pik for u or ill take a pik
u if u look under there is one that is a single on that ut plugs into its on the top next the the 2 or 3 pin one ill try to find a pik for u or ill take a pik
#28
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Rainy, WA, United State
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BRIANP)
remove the black wire from the ebay plug and plug that black wire into the existing factory plug right by the kick panel you cant miss it it has 2wires already pluged in
#29
Re: (DynastyRacer22)
I was using the ebay plugs in to the fuse box and i knew i had it right but it would not work so i broke out the trusty test light and went to work. found out that i had power before the plugs but not after so off came the plugs and i had them up and going in 20min. the only thing is my switch light stays on all the time when the key is turned on. i will rewire it later i was just tired of messing with it.
#30
Honda-Tech Member
Join Date: Sep 2006
Location: Bay Area, ca, USA
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BRIANP)
i've got a problem, same situation as that picture, i cant seem to find the 5 connector thing where im suppose to plug the black wire, instead mine is a 10 connector but it looks like the same 2 wires going into it. is that it?
Modified by noss88 at 5:03 PM 7/6/2008
Modified by noss88 at 5:03 PM 7/6/2008
#33
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Rainy, WA, United State
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
mines an lx as well haha well i guess we both need help also my switch light sucks!!! it sits too flush to the point i cant push it on or off!
#37
so what exactly are you guys stuck on? thoseDIY pics was basically the best i've seen... fogs should work after following those steps...
once you have the fogs, relay, switch, and grounds connected...
you should only have 2 plugs that need to go into the fuse box.
one for constant power and one for low beam. they are right next to each other.
there should be two connectors leftover which i have found to be useless. in all honesty it took me forever (months of frustration/giving up) to get them to work... but i'd recommend making your own harness because the switch is crappy and the stock switch will require modification to the harness anyway.
once you have the fogs, relay, switch, and grounds connected...
you should only have 2 plugs that need to go into the fuse box.
one for constant power and one for low beam. they are right next to each other.
there should be two connectors leftover which i have found to be useless. in all honesty it took me forever (months of frustration/giving up) to get them to work... but i'd recommend making your own harness because the switch is crappy and the stock switch will require modification to the harness anyway.
#43
Honda-Tech Member
Join Date: Nov 2006
Location: vineland, nj, usa
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rebell)
all thorse problems...thats another reason i jus wired mine into the running lights. ok so they are on all the time, no matter if my hi or low beams are on...IDC about that. more light = more night vision. simple solution in my eyes. easily reversable if you decide to remove them andalot less hassle takes install time down to 1/2 hr pretty much.
#44
Junior Member
Join Date: Jan 2008
Location: waipahu, Hawaii, USA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: (homelessEm2)
i got my fogs running but whenever i turn them on and 5 min later i see smoke on the glass and its really hot when i touch it.
why is that?
Modified by rebell at 1:36 PM 7/12/2008
why is that?
Modified by rebell at 1:36 PM 7/12/2008
#46
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Rainy, WA, United State
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
^ thanks dude i guess where the fuse is it has 3pin for the power and on my 4pin harness the power was all the way to the left not meeting the power connection from the fuse..and i couldnt remove it to put it on the far right so i just cut the one that is supose to plug into the kick panel and tap it to the other one that goes where the fuse is since that one is all the way on the far right lol but yea mines get really hot too and smokes come out of it im guessin it has to break in and its smoking from the glue..anyways i found a website that has the oem switch for 10bucks!
http://honda.dealerfit.com/sto...4.php
Modified by DynastyRacer22 at 5:08 AM 7/14/2008
http://honda.dealerfit.com/sto...4.php
Modified by DynastyRacer22 at 5:08 AM 7/14/2008
#48
Junior Member
Join Date: Sep 2006
Location: Austin, Texas, USA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Teh Boss
Honda Civic / Del Sol (1992 - 2000)
34
06-25-2016 05:45 PM