♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
Join Date: Feb 2006
Location: Hella North, Toronto
Posts: 2,069
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gianinline)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gianinline »</TD></TR><TR><TD CLASS="quote">mr. hotsauce... i wish i had painted by block too when i had the chance, but i only cleaned it the best i could.
The color/shade of your motor is looking just like i wish i had got mine!
</TD></TR></TABLE>
I was going to do the same, but I went on a trip to europe and the motor sat in a garage for 4 weeks. When I got back, I saw white corroded gunk all over the motor and tranny after I cleaned it. I'm going to try and spray it quickly before the motor goes in.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sheepey »</TD></TR><TR><TD CLASS="quote">
acually I got rid of some . Ill post pix of bay once I have it all done.... </TD></TR></TABLE>
Oh ****! I'm looking forward to seeing the outcome, from the pics you posted, it looks even better than before!
The color/shade of your motor is looking just like i wish i had got mine!
</TD></TR></TABLE>
I was going to do the same, but I went on a trip to europe and the motor sat in a garage for 4 weeks. When I got back, I saw white corroded gunk all over the motor and tranny after I cleaned it. I'm going to try and spray it quickly before the motor goes in.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sheepey »</TD></TR><TR><TD CLASS="quote">
acually I got rid of some . Ill post pix of bay once I have it all done.... </TD></TR></TABLE>
Oh ****! I'm looking forward to seeing the outcome, from the pics you posted, it looks even better than before!
Honda-Tech Member
Join Date: Dec 2004
Location: Bay Area, CA
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dannydos)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dannydos »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
the postitive terminal looks off
the postitive terminal looks off
Member
Join Date: Apr 2006
Location: Swapin Motors,Tuckin Bays and Making Harness, CT, USfukenA
Posts: 5,000
Likes: 0
Received 0 Likes
on
0 Posts
Re: (marc-111)
ya so stock block made 198.6 hp gonna try a bigger exhaust see if we can brake 200. congrats itrpwrdcrx
Modified by NHswaps13203 at 11:10 PM 9/6/2008
Modified by NHswaps13203 at 11:10 PM 9/6/2008
Honda-Tech Member
Join Date: Dec 2003
Location: Somewhere Down Under!!
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Fresh'86)
I just end up painting my tranny and block black... figure i just give it a ninga look since my car black to..i need to get some pics of my tuck here going...
HT's TOP CHEF
iTrader: (1)
Join Date: Apr 2006
Location: DICKIES & FLIP FLOPS, FL
Posts: 7,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1badda)
Uh silly question but how often do the Earl's inline fuel filters have to be replaced? I asked only because they are so much smaller then the OEM filters.
Re: (ErrDizzle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ErrDizzle »</TD></TR><TR><TD CLASS="quote">
the postitive terminal looks off
</TD></TR></TABLE>
it is off a lil...mainly because i was followin the lines of the firewall...i could've made the holes closer..but i was worried about when i use jumper cables that it would be to close..it is what it is..if you see the whole setup it flows nice
the postitive terminal looks off
</TD></TR></TABLE>
it is off a lil...mainly because i was followin the lines of the firewall...i could've made the holes closer..but i was worried about when i use jumper cables that it would be to close..it is what it is..if you see the whole setup it flows nice
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: Packing Up For Retirement, OR
Posts: 6,374
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NHswaps13203)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NHswaps13203 »</TD></TR><TR><TD CLASS="quote">ya so stock block made 198.6 hp gonna try a bigger exhaust see if we can brake 200. congrats itrpwrdcrx
</TD></TR></TABLE>
What specs??
</TD></TR></TABLE>
What specs??
Member
Join Date: Apr 2006
Location: Swapin Motors,Tuckin Bays and Making Harness, CT, USfukenA
Posts: 5,000
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jime64871)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jime64871 »</TD></TR><TR><TD CLASS="quote">
What specs??
</TD></TR></TABLE>
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300
What specs??
</TD></TR></TABLE>
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: Packing Up For Retirement, OR
Posts: 6,374
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NHswaps13203)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NHswaps13203 »</TD></TR><TR><TD CLASS="quote">
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300</TD></TR></TABLE>
nice...
bottom-end untouched.
Try a cold air intake system that should get you into the 200's
How the Pro1's idle, perform? I have these and couldn't stand the idle issues..so went to
Stage II's
....
Sorry guys, i know it's off topic...
Bays in this page are lookin' sick though, something i'll do in the near future.
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300</TD></TR></TABLE>
nice...
bottom-end untouched.
Try a cold air intake system that should get you into the 200's
How the Pro1's idle, perform? I have these and couldn't stand the idle issues..so went to
Stage II's
....
Sorry guys, i know it's off topic...
Bays in this page are lookin' sick though, something i'll do in the near future.
Honda-Tech Member
iTrader: (5)
Join Date: Jan 2007
Location: columbus, ohio
Posts: 15,759
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1badda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1badda »</TD></TR><TR><TD CLASS="quote">I just end up painting my tranny and block black... figure i just give it a ninga look since my car black to..i need to get some pics of my tuck here going...
</TD></TR></TABLE>
i wanna see pics how it looks in your bay !!!
</TD></TR></TABLE>
i wanna see pics how it looks in your bay !!!
HRD PKR
Join Date: Nov 2005
Location: Gods wonderland
Posts: 13,211
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NHswaps13203)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NHswaps13203 »</TD></TR><TR><TD CLASS="quote">
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300</TD></TR></TABLE>
Thats odd that couldnt make 200, A dude from bama made 201whp bone stock just with bolt on's and a tune
alaniz built head
ported itr intake manifold
ported itr TB
skunk2 pro1s
hytech rep header
jdm itr block
tuned on s300</TD></TR></TABLE>
Thats odd that couldnt make 200, A dude from bama made 201whp bone stock just with bolt on's and a tune
Honda-Tech Member
Re: (Dredakid05)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dredakid05 »</TD></TR><TR><TD CLASS="quote">wow! thats lot information ever ive seen! i dont have any question to ask because there answer im lookin for! THANKS!</TD></TR></TABLE>
Huh...
Huh...
Honda-Tech Member
Re: (Hater)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hater »</TD></TR><TR><TD CLASS="quote">
Huh... </TD></TR></TABLE>
truth
Huh... </TD></TR></TABLE>
truth
Honda-Tech Order of Merit
iTrader: (4)
Join Date: Dec 2003
Location: PA
Posts: 10,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B16B_coupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe »</TD></TR><TR><TD CLASS="quote">Thats odd that couldnt make 200, A dude from bama made 201whp bone stock just with bolt on's and a tune</TD></TR></TABLE>
dont forget the reading differences on the dyno's
dont forget the reading differences on the dyno's
Member
Join Date: Apr 2006
Location: Swapin Motors,Tuckin Bays and Making Harness, CT, USfukenA
Posts: 5,000
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jime64871)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jime64871 »</TD></TR><TR><TD CLASS="quote">
nice...
bottom-end untouched.
Try a cold air intake system that should get you into the 200's
How the Pro1's idle, perform? I have these and couldn't stand the idle issues..so went to
Stage II's
....
Sorry guys, i know it's off topic...
Bays in this page are lookin' sick though, something i'll do in the near future.</TD></TR></TABLE>
really a cai? we have the bpi velocity stack thought that would do the trick, idle is actually on point! tuned by gato aka felix
nice...
bottom-end untouched.
Try a cold air intake system that should get you into the 200's
How the Pro1's idle, perform? I have these and couldn't stand the idle issues..so went to
Stage II's
....
Sorry guys, i know it's off topic...
Bays in this page are lookin' sick though, something i'll do in the near future.</TD></TR></TABLE>
really a cai? we have the bpi velocity stack thought that would do the trick, idle is actually on point! tuned by gato aka felix
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: Packing Up For Retirement, OR
Posts: 6,374
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NHswaps13203)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NHswaps13203 »</TD></TR><TR><TD CLASS="quote">really a cai? we have the bpi velocity stack thought that would do the trick, idle is actually on point! tuned by gato aka felix</TD></TR></TABLE>
That might actually work...
Since the car is strapped. you could also try Hondata's Intake Man. cooler...
That might actually work...
Since the car is strapped. you could also try Hondata's Intake Man. cooler...
Honda-Tech Member
iTrader: (1)
Re: (Chris.)
The car made 201 at one dyno in montgomery after a new tune and some better exhaust. A month before that in birmingham it made 195 with some other crap exhaust and a diff tune. Then it made 198 at the same dyno in Birmingham, after it made 201 at the montgomery dyno.
Air temps were the big contribution to making the 201. It was a perfect night in bama
Air temps were the big contribution to making the 201. It was a perfect night in bama
Honda-Tech Member
Join Date: Apr 2008
Location: My Garage
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Re: (viskii420)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by viskii420 »</TD></TR><TR><TD CLASS="quote">Before
After
</TD></TR></TABLE>
wanna do mine?
After
</TD></TR></TABLE>
wanna do mine?