Post pics of your built motor on the engine stand!
#52
Honda-Tech Member
Join Date: Jun 2004
Location: Bobby, Bobby, Bobby, Diggi, Diggi, Diggi
Posts: 3,405
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pics of your built motor on the engine stand! (bbun)
there was a built turbo SOHC that put over 350whp down at the shop earlier this week...not bad, but with the money he spent he could of had a 5-600hp DOHC
bump for a dope *** thread!
bump for a dope *** thread!
#55
Guest
Posts: n/a
Re: Post pics of your built motor on the engine stand! (volcom40street)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by volcom40street »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CTR PCT Pistons in a B18A/B. Is that going to run on pump gas???????
</TD></TR></TABLE>
OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CTR PCT Pistons in a B18A/B. Is that going to run on pump gas???????
#56
Honda-Tech Member
Join Date: May 2003
Location: Portland, Oregon
Posts: 5,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pics of your built motor on the engine stand! (kNOwLedGeDA9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 »</TD></TR><TR><TD CLASS="quote">OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CTR PCT Pistons in a B18A/B. Is that going to run on pump gas???????</TD></TR></TABLE>
No ****. That's some serious dome!!
No ****. That's some serious dome!!
#57
Honda-Tech Member
Join Date: Jul 2002
Location: West Texas
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pics of your built motor on the engine stand! (kNOwLedGeDA9)
Mine will be up in a few days. I get my week vacation next week, so that means I'll be in the shop all week
#58
B*a*n*n*e*d
Join Date: Apr 2004
Location: Placentia, CA, US
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pics of your built motor on the engine stand! (EJ1 wilcox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ1 wilcox »</TD></TR><TR><TD CLASS="quote">
No ****. That's some serious dome!! </TD></TR></TABLE>
LOL this will run on a mixture of pump and race. The compression with my crower 405a cams will be at 11.2-4. Stock it would be 12.4 with these pistons My goal is to hit 200whp with this 81mm bore ls engine, will see
No ****. That's some serious dome!! </TD></TR></TABLE>
LOL this will run on a mixture of pump and race. The compression with my crower 405a cams will be at 11.2-4. Stock it would be 12.4 with these pistons My goal is to hit 200whp with this 81mm bore ls engine, will see
#66
#73
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pics of your built motor on the engine stand! (methodofpayment)
I'm very happy to join the thread I started
It's just a stock D16Y8 for now, but I plan on stripping the block, doing a hone/align/hot-tank, and stuffing the internals with Vitara pistons, Eagle or Tuner Toys rods, ACL bearings, all new seals and gaskets, and going for 300whp on stock sleeves and pump gas
It's just a stock D16Y8 for now, but I plan on stripping the block, doing a hone/align/hot-tank, and stuffing the internals with Vitara pistons, Eagle or Tuner Toys rods, ACL bearings, all new seals and gaskets, and going for 300whp on stock sleeves and pump gas
#74
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2004
Location: where it rains 24/7 stay away...
Posts: 5,527
Likes: 0
Received 8 Likes
on
8 Posts
Re: Post pics of your built motor on the engine stand! (I3ackfire)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I3ackfire »</TD></TR><TR><TD CLASS="quote">Showoff </TD></TR></TABLE>
hahaha lol dont hate
hahaha lol dont hate