goforbroke

I picked up some old school bbs rims from a friend of mine for dirt cheap and I just wanted to clean them up. They are three peice rims. I decided to take the lips off and polish them. So I took the clearcoat off today with some aircraft striper. I was surprised how shiny it turned out. Here is a comparsion of each rim. Should I even bother polishing the lips. Or should I just spray a couple coats of clear coat on them and leave them alone. Up for suggestions?

5STAR3

when in doubt, POLISH!!!! haha

C4st0r_Tr0y

sure, they are dirty at least clean them up.

goforbroke

I cleaned the right one and left the stock the way it was when I received them. Do you guys even think I need to polish them with the 320 grit, 600,800,1000,1500,2000 wetsand, and mothers polish. Or could I skip a few steps and move to 1000 grit wet sand.

distortedfuture

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C4st0r_Tr0y &raquo;</TD></TR><TR><TD CLASS="quote">sure, they are dirty at least clean them up.</TD></TR></TABLE>

Options

Black spoked and polish the lips.

ChadB

POLISH!!!!

-RedneckDave-

I am trying to decide what to do with my new wheels. I just got some Blitz type 01's and I don't know if I would rather polish the whole wheel or just the lip and paint the centers gloss black.

Dsm634

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChadB &raquo;</TD></TR><TR><TD CLASS="quote">POLISH!!!! </TD></TR></TABLE>

goforbroke

Polish it is then. I was going to leave the center its stock color. I thought about painting that black but...........