E.Honda

Ok so I have been working on fitting the rear body kit and trying to get all the body lines working. As most of you know these aftermarket fiberglass parts fit like poop. But if you have some basic body skills and some time on your hands they can be made to fit. I don't recall the name of this back bumper but I have seen many of them on cars and they look bad due to fitament issues. A keen eye will notice I have removed the mesh that is aquainted with what most will call rice. I removed it because it looked like every other rear bumper made like this and because I think it adds a cleaner look.

Please if all you have to say is Rice rice baby or some other childish commment just skip it and move on.

This is not going to be a flame thread.

So be mature if at all possoble.

Thank you.


The exhaust needs to be redone for a better fit. I am working on a sectional tig welded set-up that I can have powder coated.
I rolled the fender lips and smoothed them out for a better finish. The green stuff you see is 3m spot putty that will be sanded slick to clean any imperfections in the bondo.

This is a piece of 1/4 inch round stainless. Due to the shape of the openening it is held in place by the angle of the fiberglass. Kinda like a chinese finger cuff.





You can see in this photo what I am talking about with the exhaust tips. One is sitting lower than the other which makes it look like the openings are not the same shape. Optical illusion. I measured with templates.



The rear wing is a 3D carbon fiber unit. Same as a wings west.

Tag frame is also carbon fiber.

This photo shows the bumper now meeting up with the opening of the fender well. When I got it, it was 1 inch too short to meet the edge. So I built it up with fiberglass to meet the edge and shaped to fit.
The purple trailing arm will be replaced with a black powder coated piece like these.


I am working on making some brembo four piston calipers fit the front and rear.




Have a good one people.

E.Honda



Modified by E.Honda at 3:06 AM 7/16/2006


Modified by E.Honda at 3:18 AM 7/16/2006

jdminthemakin

hmm, nice brake

kidkombo

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdminthemakin &raquo;</TD></TR><TR><TD CLASS="quote">hmm, nice brake</TD></TR></TABLE>

yeah nice brake rotor

Fook_me_honda

great job on the body work not fond of the car though

kidkombo

oh yeah thats a 'black widow' rear bumper....looks like a giant cardboard box...thanks for not molding the trunk and bumper and quarter panels together.

E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kidkombo &raquo;</TD></TR><TR><TD CLASS="quote">oh yeah thats a 'black widow' rear bumper....looks like a giant cardboard box...thanks for not molding the trunk and bumper and quarter panels together. </TD></TR></TABLE>

Won't do it. That work always cracks and ruins your paint job.

Undercover_Skank

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">

Won't do it. That work always cracks and ruins your paint job.</TD></TR></TABLE>

true...everything looks like it lines up good now

drastikchangez

iTrader: (2)

looks good bro props on doing some good bodywork.

DUFFM4N

LowTEC-JERMZ

props for the body work, but the car isnt my cup of tea

VIS250P

RICE RICE BABY!!!

Ryan.

Looks like a lot of work. goodluck.

WERD up

no

bonta-kun

u know what every time you post here i always think "whats this ricer doing hes gonna get flamed" but i realized that ur doing everything the right way not taking short cuts and its all done by you

so props man that body kits fits really good compared to those other jokes driving around with body kits

but if you ask me i dont like the car but its your car and my opinion doesnt matter

hellshock2182

bwahhahahahahahahaha

Hella Flush Kevin

pretty ugly, but hay i still have drums on my car

DC4KiD

iTrader: (4)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kidkombo &raquo;</TD></TR><TR><TD CLASS="quote">

yeah nice brake rotor </TD></TR></TABLE>

I got a honda

damn ur still workin on this car? kool though

prayludin

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DEESEE_JERMZ &raquo;</TD></TR><TR><TD CLASS="quote">props for the body work, but the car isnt my cup of tea</TD></TR></TABLE>

-auSTIn-

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">A keen eye will notice I have removed the mesh that is acquainted with what most will call rice.
</TD></TR></TABLE>

Good to hear you removed the mesh- Now step two is to remove the bumper that is acquainted with being rice...

I can appreciate good hard work, but not if I find the end result to be unappealing..
A for effort I guess?

Nice rotors though....

E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by py &raquo;</TD></TR><TR><TD CLASS="quote">RICE RICE BABY!!!</TD></TR></TABLE>

Look at your name.....Full Name KWAN YANG.

Now if anything deserves "rice" it is you.

I said be MATURE dork.

Have a great day everbody.

Chris.

iTrader: (4)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DEESEE_JERMZ &raquo;</TD></TR><TR><TD CLASS="quote">props for the body work, but the car isnt my cup of tea</TD></TR></TABLE>

good luck with the rest of the build

dohcVTECeg2

cant wait to see this get crushed

B.

dude i can respect what you're doing with the car but that wing is absolutely terrible.......

American.Graffiti

iTrader: (7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fook_me_honda &raquo;</TD></TR><TR><TD CLASS="quote"> great job on the body work not fond of the car though </TD></TR></TABLE>