No Part untouched... The 2005/2006 ground up EJ1 Build.
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Hello Friend, illinois
Posts: 4,670
Likes: 0
Received 0 Likes
on
0 Posts
No Part untouched... The 2005/2006 ground up EJ1 Build.
i was very hesitant to post it up on honda tech... but since im that bored i will now..
well ive been posting pics on http://www.k20a.org and on http://www.ej1ownersclub.com
So i will compile them ALL here to one mega-awesome-superjdm-****-barbeque-ultrapicturepost
original post
http://s14.invisionfree.com/EJ1_Owners_Clu...hp?showtopic=54
NEW PICTURE UPDATES>.. got a shitload of stuff done today....
Passenger side mount bracket OFF!
EWWW look what i found!!! shitty fix job once upon a time of the cars life.....
Same old empty bay before i started to work on it
Windshield fun..... (my brother in law in front.. and my good buddy chris in back)
after about an hour... its out..
My parking lot... LOLZ
Chris loves to grind on holes...... lol
smoky garage.... almost fully stripped interior....
I cleaned up the trunk area a bit.... yet again.. smoky garage
Brother in law... working on the quarter...
SOme shitty welds.... but hey they work..
THE FIREPOWER!!!!!!! haha its the best we could get
me welding
**** pile
Grind y0 nuts
Some of the clean up
SOme more welds..
A quick coat of primer just to see if its looking decent...
SOme more shitty welds
Quarter completely off.. finally
Some more crappy welds lolz
I die bc there is no room under the car to weld
Check that gap y0
tailight bolted on for ***** and giggles
wooo finally done pulling **** outta the interior
#1 the tar is a complete bitch..
#2 the glue they use to glue down the tar is way worse than the tar itself.
#3 paint stripper fumes get to your head... cause headaches...
#4 im soo tired after over 12 hours of working on this thing
next set of pics
FUll race 6 point... (dunno what the camera did but the bars arent bent like that lol)
The fuel system came!!! (thanks to the parts list from the karcepts aeromotive bracket post!)
and the karcepts box!!!!
And the EP3 idler pulley!!!
SUJA 1 CLUTCH LINE!!!!!!!!!!!!!!!
AND MY HASPORTS CAME!!!!! Thanks to Merced Imports
Drivers side is getting there...
So is the passenger side!!!
3rd set
4th set
how about some motor test fit action?
"Dream it, you fuking dreamers"- Dane Cook
5th set
New camera+ new parts+ finishing welding quarters= new pics....
sorry tripod owns me on some pics
Dont ask about the "spun wheels centers" they came with the JHPUSA Supermesh rims... (theyre currently getting some sticky rubber mounted on them so i dont have pics)
6th set
Oooo mysterious
here are some pics of my wheels... and i got the OEM axle combo done...RSX innners and BSeries outters...
Front wheels/tires...
REAR
Axles
I FINISHED MY WORK>>> now its up to the body shop/welder for the cage
:D :D :D :D :D :D :D
ON TO THE PIXORS!@
Deng fat *** tires
Went to see the car!..... pics of the cage are here.....
then we had someone tow th ebeast to the body shop..... and it sits there currently... awaiting the starting tasks... haha... so ill have pdates from the body shop probably all throughout the next few weeks to a month or 2..
on to the pixorsss
sorry for the pics on some of them i was in a hurry
Modified by JDM EJ1 95 at 11:32 PM 1/16/2006
well ive been posting pics on http://www.k20a.org and on http://www.ej1ownersclub.com
So i will compile them ALL here to one mega-awesome-superjdm-****-barbeque-ultrapicturepost
original post
http://s14.invisionfree.com/EJ1_Owners_Clu...hp?showtopic=54
NEW PICTURE UPDATES>.. got a shitload of stuff done today....
Passenger side mount bracket OFF!
EWWW look what i found!!! shitty fix job once upon a time of the cars life.....
Same old empty bay before i started to work on it
Windshield fun..... (my brother in law in front.. and my good buddy chris in back)
after about an hour... its out..
My parking lot... LOLZ
Chris loves to grind on holes...... lol
smoky garage.... almost fully stripped interior....
I cleaned up the trunk area a bit.... yet again.. smoky garage
Brother in law... working on the quarter...
SOme shitty welds.... but hey they work..
THE FIREPOWER!!!!!!! haha its the best we could get
me welding
**** pile
Grind y0 nuts
Some of the clean up
SOme more welds..
A quick coat of primer just to see if its looking decent...
SOme more shitty welds
Quarter completely off.. finally
Some more crappy welds lolz
I die bc there is no room under the car to weld
Check that gap y0
tailight bolted on for ***** and giggles
wooo finally done pulling **** outta the interior
#1 the tar is a complete bitch..
#2 the glue they use to glue down the tar is way worse than the tar itself.
#3 paint stripper fumes get to your head... cause headaches...
#4 im soo tired after over 12 hours of working on this thing
next set of pics
FUll race 6 point... (dunno what the camera did but the bars arent bent like that lol)
The fuel system came!!! (thanks to the parts list from the karcepts aeromotive bracket post!)
and the karcepts box!!!!
And the EP3 idler pulley!!!
SUJA 1 CLUTCH LINE!!!!!!!!!!!!!!!
AND MY HASPORTS CAME!!!!! Thanks to Merced Imports
Drivers side is getting there...
So is the passenger side!!!
3rd set
4th set
how about some motor test fit action?
"Dream it, you fuking dreamers"- Dane Cook
5th set
New camera+ new parts+ finishing welding quarters= new pics....
sorry tripod owns me on some pics
Dont ask about the "spun wheels centers" they came with the JHPUSA Supermesh rims... (theyre currently getting some sticky rubber mounted on them so i dont have pics)
6th set
Oooo mysterious
here are some pics of my wheels... and i got the OEM axle combo done...RSX innners and BSeries outters...
Front wheels/tires...
REAR
Axles
I FINISHED MY WORK>>> now its up to the body shop/welder for the cage
:D :D :D :D :D :D :D
ON TO THE PIXORS!@
Deng fat *** tires
Went to see the car!..... pics of the cage are here.....
then we had someone tow th ebeast to the body shop..... and it sits there currently... awaiting the starting tasks... haha... so ill have pdates from the body shop probably all throughout the next few weeks to a month or 2..
on to the pixorsss
sorry for the pics on some of them i was in a hurry
Modified by JDM EJ1 95 at 11:32 PM 1/16/2006
#3
Member
Join Date: Dec 2003
Location: San Diego, CA
Posts: 2,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: No Part untouched... The 2005/2006 ground up EJ1 Build. (spoonef)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonef »</TD></TR><TR><TD CLASS="quote">OMGGGGG </TD></TR></TABLE>
#7
Honda-Tech Member
Join Date: Aug 2004
Location: where the weirdos are, so. ca
Posts: 2,264
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM EJ1 95)
nevermind the body work, it mustve taken 12 hours to put all those pics up.
so, whats with all the work? just to say you did it?
why not just buy a car with a straight body to begin with?
either way, nice work...keep us posted.
so, whats with all the work? just to say you did it?
why not just buy a car with a straight body to begin with?
either way, nice work...keep us posted.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Hello Friend, illinois
Posts: 4,670
Likes: 0
Received 0 Likes
on
0 Posts
yea man dont ever do 2 quarter panels........
IT SUCKKKKKKKKS!
theres way more time into this car than anything ive ever set forth at in my lifetime..
i almost got to the point where i didnt wanna touch the car anymore... but now in the final stages of the project im getting very proud of it and i cant wait to see what my hard work has done
IT SUCKKKKKKKKS!
theres way more time into this car than anything ive ever set forth at in my lifetime..
i almost got to the point where i didnt wanna touch the car anymore... but now in the final stages of the project im getting very proud of it and i cant wait to see what my hard work has done
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Hello Friend, illinois
Posts: 4,670
Likes: 0
Received 0 Likes
on
0 Posts
Re: (peacexisxfree)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by peacexisxfree »</TD></TR><TR><TD CLASS="quote">nevermind the body work, it mustve taken 12 hours to put all those pics up.
so, whats with all the work? just to say you did it?
why not just buy a car with a straight body to begin with?
either way, nice work...keep us posted.</TD></TR></TABLE>
a car with a strait body in the midwest is IMPOSSIBLE to find...
IMPOSSIBLE
and i wanted to fix the rust the right way and replace the quarters instead of the almost right way and do patch panels...
now i have a rustless/dentless car... ! and its basically brand new!
so, whats with all the work? just to say you did it?
why not just buy a car with a straight body to begin with?
either way, nice work...keep us posted.</TD></TR></TABLE>
a car with a strait body in the midwest is IMPOSSIBLE to find...
IMPOSSIBLE
and i wanted to fix the rust the right way and replace the quarters instead of the almost right way and do patch panels...
now i have a rustless/dentless car... ! and its basically brand new!
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Hello Friend, illinois
Posts: 4,670
Likes: 0
Received 0 Likes
on
0 Posts
me neither.. haha the car is a money trap..
i was doing 2 jobs for a while and almost couldnt keep up
this car is also co owned... about 50/50... its a brother/brother in law project...
i was doing 2 jobs for a while and almost couldnt keep up
this car is also co owned... about 50/50... its a brother/brother in law project...