New Project: 95 Eclipse GST...many updates to follow...
#1
Honda-Tech Member
Thread Starter
New Project: 95 Eclipse GST...many updates to follow...
****Car is Finished and Sold.****
It seems like everyone likes to post pictures and updates of their progress on particular projects. Now i realize this isn't a honda, but it should be interesting to those who like factory turbo cars.
Here are two pictures of the eclipse, it is a 95 and came with 95 headlights, no bumper, no fog lights. I've since acquired 99 headlights, 99 front bumper and oem fog lights.
The car will also be getting a supra smic, buschur racing upper IC pipe, 1g crushed bov, ported small 16g (good for about 280whp), act 2100 clutch setup, ceramic coated exhaust manifold, o2 housing and turbo exhaust housing. I'm having the sideskirts (new replacement sideskirt for passenger side), and bumper painted this week.
I just need to buy a downpipe (has 3inch exhaust), fuel pump and some type of fuel controller so i can run 18-20psi on the street. 16inch Polished/Chrome OEM GST wheels with new tires will also be added when i find a set for a decent price.
More pictures will follow as i make progress on this...which should happen over the next two weeks. I'm doing this so i have a reliable daily driver which is decently quick. This will allow me to work on the car i actually care about...which is the 89 Dodge Colt GT. (i know, i know, i know...an 89 dodge colt)
front bumper cover/sideskirts/rear wing are painted...
OEM GST Wheels Stripped...
OEM GST Wheel Polished (on right) vs Not Polished (left)
Washed/Waxed the Whole Car...
cleaned the interior briefly...still needs more attention...
fog lights are installed...bumper cover roughly fitted into place...
Exhaust Manifold, Turbine Housing, O2 Housing are finished...(i'll have pictures of these items ported saturday/sunday)
cheap horsepower mod here...according to dsm experts porting is good for 10+whp. i'm guessing its closer to 5whp, but its still easy and inexpensive to port everything. here are a few pictures.
before...
after...
before...
after...
after...
VRS 2.5inch downpipe
here are a few pics of the act 2100...like i said before...this is/was my least favorite thing to do.
Modified by chet at 4:46 PM 1/25/2006
Modified by chet at 4:53 PM 1/25/2006
Modified by chet at 3:03 AM 2/24/2006
It seems like everyone likes to post pictures and updates of their progress on particular projects. Now i realize this isn't a honda, but it should be interesting to those who like factory turbo cars.
Here are two pictures of the eclipse, it is a 95 and came with 95 headlights, no bumper, no fog lights. I've since acquired 99 headlights, 99 front bumper and oem fog lights.
The car will also be getting a supra smic, buschur racing upper IC pipe, 1g crushed bov, ported small 16g (good for about 280whp), act 2100 clutch setup, ceramic coated exhaust manifold, o2 housing and turbo exhaust housing. I'm having the sideskirts (new replacement sideskirt for passenger side), and bumper painted this week.
I just need to buy a downpipe (has 3inch exhaust), fuel pump and some type of fuel controller so i can run 18-20psi on the street. 16inch Polished/Chrome OEM GST wheels with new tires will also be added when i find a set for a decent price.
More pictures will follow as i make progress on this...which should happen over the next two weeks. I'm doing this so i have a reliable daily driver which is decently quick. This will allow me to work on the car i actually care about...which is the 89 Dodge Colt GT. (i know, i know, i know...an 89 dodge colt)
front bumper cover/sideskirts/rear wing are painted...
OEM GST Wheels Stripped...
OEM GST Wheel Polished (on right) vs Not Polished (left)
Washed/Waxed the Whole Car...
cleaned the interior briefly...still needs more attention...
fog lights are installed...bumper cover roughly fitted into place...
Exhaust Manifold, Turbine Housing, O2 Housing are finished...(i'll have pictures of these items ported saturday/sunday)
cheap horsepower mod here...according to dsm experts porting is good for 10+whp. i'm guessing its closer to 5whp, but its still easy and inexpensive to port everything. here are a few pictures.
before...
after...
before...
after...
after...
VRS 2.5inch downpipe
here are a few pics of the act 2100...like i said before...this is/was my least favorite thing to do.
Modified by chet at 4:46 PM 1/25/2006
Modified by chet at 4:53 PM 1/25/2006
Modified by chet at 3:03 AM 2/24/2006
#2
Join Date: Jul 2004
Location: east cost, newyork, united states
Posts: 1,380
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
i love that generation eclipses. good luck on the project and dont listen to the flamers here.
#3
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
good luck with the project
uve had some pretty nice cars in the past, i expect this to be another one of those crazy dsms
and an extra for the colt, cuz its just bananas
uve had some pretty nice cars in the past, i expect this to be another one of those crazy dsms
and an extra for the colt, cuz its just bananas
#4
Honda-Tech Member
Thread Starter
Re: New Project: 95 Eclipse GST...many updates to follow... (v-tec maz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by v-tec maz »</TD></TR><TR><TD CLASS="quote">i love that generation eclipses. good luck on the project and dont listen to the flamers here. </TD></TR></TABLE>
i like the flamers...it makes for a more interesting thread.
the best part about these cars is how easy they are to work on/make power. with 280whp, the setup will be 100% reliable and somewhat fun to drive. obviously its not a 400whp 8000rpm turbo honda, or a 320whp dodge colt...but for the daily drive...taking girls out...etc...it should suffice.
i like the flamers...it makes for a more interesting thread.
the best part about these cars is how easy they are to work on/make power. with 280whp, the setup will be 100% reliable and somewhat fun to drive. obviously its not a 400whp 8000rpm turbo honda, or a 320whp dodge colt...but for the daily drive...taking girls out...etc...it should suffice.
#5
Honda-Tech Member
Thread Starter
Re: New Project: 95 Eclipse GST...many updates to follow... (v-tec maz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by v-tec maz »</TD></TR><TR><TD CLASS="quote">i love that generation eclipses. good luck on the project and dont listen to the flamers here. </TD></TR></TABLE>
i like this generation more...
its just difficult finding one in decent shape...
my old awd 1g...
i like this generation more...
its just difficult finding one in decent shape...
my old awd 1g...
#6
Don't call it a comeback
Join Date: Oct 2001
Location: Greenville SC
Posts: 20,968
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
6 bolt that bitch!
Bizzle-DSM NUT!
BTW, i love to see people around here messing with the Mitsu's!
Bizzle-DSM NUT!
BTW, i love to see people around here messing with the Mitsu's!
#7
Honda-Tech Member
Join Date: Aug 2005
Location: Pompano Beach, FL, USA
Posts: 3,495
Likes: 0
Received 5 Likes
on
4 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
seems like your headlights are a little yellow... ...that is very common and can easily be returned to a more clear looking.
Use some "rubbing compound", same stuff used on buffing cars and apply on headlights..... scrub them as hard as you can, repeat the process 2 or 3 times, after that.... clean them up and look at them so shiny dawwwwwwg...
Use some "rubbing compound", same stuff used on buffing cars and apply on headlights..... scrub them as hard as you can, repeat the process 2 or 3 times, after that.... clean them up and look at them so shiny dawwwwwwg...
Trending Topics
#9
B*a*n*n*e*d
Join Date: Apr 2003
Location: Nampa, ID, US
Posts: 7,532
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (DxHatchback)
Nice Eclipse. Good luck with the project. Make sure you watch for the ever so threatening CrankWalk.
I used to have a 2G Non Turbo Spyder that I did a DOHC head swap on, laid down 250whp at 8psi.
I used to have a 2G Non Turbo Spyder that I did a DOHC head swap on, laid down 250whp at 8psi.
#11
Honda-Tech Member
Thread Starter
Re: New Project: 95 Eclipse GST...many updates to follow... (ExcessivePerformance)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExcessivePerformance »</TD></TR><TR><TD CLASS="quote">Nice Eclipse. Good luck with the project. Make sure you watch for the ever so threatening CrankWalk.
I used to have a 2G Non Turbo Spyder that I did a DOHC head swap on, laid down 250whp at 8psi.</TD></TR></TABLE>
i'm not too worried about crankwalk. (maybe i should be) the clutch is adjusted properly and the motor only has 103k miles on it. eventually i'll put the 6bolt motor from the colt into the gst after a built motor goes into the colt...but that is still a few months away.
I used to have a 2G Non Turbo Spyder that I did a DOHC head swap on, laid down 250whp at 8psi.</TD></TR></TABLE>
i'm not too worried about crankwalk. (maybe i should be) the clutch is adjusted properly and the motor only has 103k miles on it. eventually i'll put the 6bolt motor from the colt into the gst after a built motor goes into the colt...but that is still a few months away.
#14
Honda-Tech Member
Thread Starter
Re: New Project: 95 Eclipse GST...many updates to follow... (MooreBoost)
ugly, cheap and decently quick.
i think this describes every car i've owned...
i think this describes every car i've owned...
#15
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2003
Posts: 10,558
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chet »</TD></TR><TR><TD CLASS="quote">ugly, cheap and decently quick.
i think this describes every car i've owned...
</TD></TR></TABLE>hahaha
i think this describes every car i've owned...
</TD></TR></TABLE>hahaha
#16
Imperious: Mod of Valor
Join Date: Oct 2003
Location: Seattle, WA
Posts: 12,393
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (chet)
My buddy has a '97 GS, I love that car. Good luck with your project. KEEP US UPDATED!
#17
Honda-Tech Member
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Project: 95 Eclipse GST...many updates to follow... (JDM-EJ1)
Well I have been here before. You may find yourself spending lots of money on something that won't stop breaking. I had a 1998 GST got crank walk. I put in a fully build 6bolt from a 1990 eclipse. That is what you are gonna want to do. I'll share with you what I did, and if you need any help doing anything or have ?'s let me know.
here she is blown up.
time for the new stuff.
crower springs and retainers.
she ran a 13.8 on a stock 14b turbo and no fuel upgrades. I never got to see what she could really do.
I put in a Fadinza flywheel and 2600 ACT clutch. Bottom end was JE pistons and every bolt I could get was ARP, Rod, mains, head, flywheel. Well good luck man wish you the best on this.
here she is blown up.
time for the new stuff.
crower springs and retainers.
she ran a 13.8 on a stock 14b turbo and no fuel upgrades. I never got to see what she could really do.
I put in a Fadinza flywheel and 2600 ACT clutch. Bottom end was JE pistons and every bolt I could get was ARP, Rod, mains, head, flywheel. Well good luck man wish you the best on this.
#18
Honda-Tech Member
Thread Starter
you know, i've had great luck with dsm's and throughout the years i've only had one item fail on me...which was a clutch master cylinder on the colt gt. keep in mind the car is an 89 and the master cylinder was pushing an act2600 pressure plate. the motor has no signs of crankwalk right now and usually the thrust bearing starts to wear because of inproper clutch adjustment, engaging the clutch to start the car and lack of good oil pressure from running the car low on oil. in my case, the car was taken care of pretty well. i have a spare 6bolt motor and it may end up going in the car at some point anyway, but as of right now i'm pretty confident with this motor and feel like its the least of my worries.
Modified by chet at 4:20 PM 12/19/2005
Modified by chet at 4:20 PM 12/19/2005
#19
Honda-Tech Member
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
Funny, I just noticed you live in ST.pete. that is where I am from. I live in zhills now about 45 min from you. Word of advice DON'T GO TO SIDEWINDERS DSM!!! That is where I am building that motor in the pic.
#20
Join Date: Aug 2002
Location: somewhere in INGLEWOOD chillin in tha hood, CA
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CBURKE)
All i gotta say is screw "Crip Walkin" , make sure ur car doesnt start "Crank Walkin" ......... but much luck on the project, and do the homework on crank walk and trannys with the dsm
#21
Honda-Tech Member
Thread Starter
Re: (CBURKE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBURKE »</TD></TR><TR><TD CLASS="quote">Funny, I just noticed you live in ST.pete. that is where I am from. I live in zhills now about 45 min from you. Word of advice DON'T GO TO SIDEWINDERS DSM!!! That is where I am building that motor in the pic. </TD></TR></TABLE>
Sidewinder DSM does suck. Thankfully i do all of my own work.
Sidewinder DSM does suck. Thankfully i do all of my own work.
#23
Honda-Tech Member
Thread Starter
Re: (CBURKE)
bumper, body panels, rear wing have all been painted.
i'll have pictures up tomorrow.
next...manifold, exhaust housing, o2 housing get ceramic coated...then i have to get this supra smic to fit behind the bumper.
i'll have pictures up tomorrow.
next...manifold, exhaust housing, o2 housing get ceramic coated...then i have to get this supra smic to fit behind the bumper.