Low Offset Wheel Thread
#730
Re: Low Offset Wheel Thread
Help im currently running 16x9 in the rear of my honda 99 civic coupe . I have tire size 1954016 and have a camber blox kit cambered in to the max . I need my tire cambered in more and wondering if there is a rear camber kit that allows more adjustment for my coupe cause i think these blox ones aint cutting it .
#733
Honda-Tech Member
iTrader: (2)
Re: Low Offset Wheel Thread
Help im currently running 16x9 in the rear of my honda 99 civic coupe . I have tire size 1954016 and have a camber blox kit cambered in to the max . I need my tire cambered in more and wondering if there is a rear camber kit that allows more adjustment for my coupe cause i think these blox ones aint cutting it .
#734
Re: Low Offset Wheel Thread
Yes i rolled my fenders and im still rubbing . I looked at my rear camber kit and its max out also so im out of ideas of how to go about in fixing the rear
#735
Re: Low Offset Wheel Thread
i know that i have to go lower
Here is what im talking about the lower i go the more i rub . So i wanted to know if there is a camber kit for the rear that offeres more camber adjustment cause these blox ones suck
#736
formerly DxHatchback
iTrader: (2)
Re: Low Offset Wheel Thread
http://www.flickr.com/photos/vivalarevels/9352191736/http://www.flickr.com/photos/vivalarevels/9352191736/ by http://www.flickr.com/people/vivalarevels/, on Flickr
15x8.5 ET33.
Lot of grinding to make them fit. Front not so much but the rears were rubbing on everything.
I also have almost no negative camber in the rear.
15x8.5 ET33.
Lot of grinding to make them fit. Front not so much but the rears were rubbing on everything.
I also have almost no negative camber in the rear.
#737
Honda-Tech Member
iTrader: (2)
Re: Low Offset Wheel Thread
Help im currently running 16x9 in the rear of my honda 99 civic coupe . I have tire size 1954016 and have a camber blox kit cambered in to the max . I need my tire cambered in more and wondering if there is a rear camber kit that allows more adjustment for my coupe cause i think these blox ones aint cutting it .
#740
Re: Low Offset Wheel Thread
Caddiman i know i was like wtf you running 205's and im at 195 at this bitch rubbing crazy . But i fixed it i just did Another rear fender roll and now im good . Im good now. Now all i neec is to know what size bbs decals i can put in my linoln hex nut covers
#747
Honda-Tech Member
Re: Low Offset Wheel Thread
Thinking about ordering 15x8 +7 work meister cr01 for my crx. Does anyone have a crx with wheels in exact or similar specs? Can you post pics?
Thanks in advance.
Thanks in advance.
#748
Honda-Tech Member
Re: Low Offset Wheel Thread
+7 is a little excessive for a crx.
You can go +24 in that width and have the same inboard clearance as oem.
You can actually go around +38 on an 8" wheel without any clearance issues inboard.
You can go +24 in that width and have the same inboard clearance as oem.
You can actually go around +38 on an 8" wheel without any clearance issues inboard.
#749
Honda-Tech Member
Re: Low Offset Wheel Thread
I was running 15x8.5 +1/+3 on my crx before, I just though the x8 +7 wouldn't be as bad