I wanna be like Clayton Bigsby.....Part 2 (Daytime PICS)
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: pappaduex
Posts: 2,582
Likes: 0
Received 0 Likes
on
0 Posts
I wanna be like Clayton Bigsby.....Part 2 (Daytime PICS)
After I get off work and went to Discount tire.. THe problem is the steering wheel were vibrate pretty bad when I was driving about 80 MPH.. My friend found out the balance metal part fall off.. SO he put balancer sticker on it and then rotate it again.. So I took a test drive and it kinda shaking a little bit.. Im not sure if I need to buy wheel hub ring or what else.. Enjoy the daytime pics:
What ya think? or
Modified by py at 11:49 PM 10/6/2006
Modified by py at 11:50 PM 10/6/2006
Modified by py at 11:50 PM 10/6/2006
What ya think? or
Modified by py at 11:49 PM 10/6/2006
Modified by py at 11:50 PM 10/6/2006
Modified by py at 11:50 PM 10/6/2006
#7
Re: I wanna be like Clayton Bigsby.....Part 2 (nathanong87)
I am gonna go out on a limb and say that the reason that your car miiiiight be vibrating is because its scraping on the ground the entire time. Waste of an R in my opinion but it looks hot as ****
Trending Topics
#9
Honda-Tech Member
Join Date: Jun 2003
Location: Mississauga, Ontario, Canada
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Re: I wanna be like Clayton Bigsby.....Part 2 (-Todd-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -Todd- »</TD></TR><TR><TD CLASS="quote">Damn thats so low. </TD></TR></TABLE>
#16
Honda-Tech Member
Join Date: Jun 2004
Location: the Zoo 406, MT, US
Posts: 1,244
Likes: 0
Received 0 Likes
on
0 Posts
Re: (no2unenolife)
looks amazing...hard to say if it drives amazingly. If you have coilovers..you should raise it up a bit and im sure a world of problems would be solved.
#17
Re: I wanna be like Clayton Bigsby.....Part 2 (FRE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FRE »</TD></TR><TR><TD CLASS="quote">Looks dope </TD></TR></TABLE>
#22
Honda-Tech Member
iTrader: (1)
Re: (Gheydm)
I love it!!!!!!!
Are you sure the wheels don't have any bends in them.
Sounds like a balancing problem.
Also on what mode is balancer being used. Alot of people use static tire balancing b/c
it usuallys saves you time and headache on getting them to balance out.
Also making sure the wheel surface that the stick on weight is being placed on is clean and free and dirt. Dirt or brake dust etc will cause the weight to not stick to its potential and eventually flying right off.
Are you sure the wheels don't have any bends in them.
Sounds like a balancing problem.
Also on what mode is balancer being used. Alot of people use static tire balancing b/c
it usuallys saves you time and headache on getting them to balance out.
Also making sure the wheel surface that the stick on weight is being placed on is clean and free and dirt. Dirt or brake dust etc will cause the weight to not stick to its potential and eventually flying right off.