few new pics H23VTEC SWAPPED CD5
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: charlotte, nc, usa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
i spun a bearing on my h22, it drove nice but lacked low end torque...thats an h23vtec from a sir wagon...it feels much better than my h22
#6
Honda-Tech Member
nah its just slow on these baords.
nice accord, out of curiosity how did you add that yellow high beam tint on there? is that just the bulb or what? because i noticed another accord with the same headlights except his high beam was filled with blue.
nice accord, out of curiosity how did you add that yellow high beam tint on there? is that just the bulb or what? because i noticed another accord with the same headlights except his high beam was filled with blue.
#7
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: charlotte, nc, usa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
i bought them like that on ebay, theyre just the jdm stanley opened up and painted. you can slightly bake them to loosen the glue and than reseal them. setup is:
1996 accord ex sedan
200k + on car
approx 50k on h23a(pulled from 2000 jdm accord awd sport wagon)
1994 jdm prelude 5 speed tranny(car converted from auto to 5 speed)
exedy stage one clutch
stainless clutch line
weapon r short shift adapter
h22a intake manifold(larger)
h22a throttle body
weapon r secret short ram intake
topspeed 4-2-1 stainless header
jdm obd1 chipped p13 4800 vtec
unorthodox ultra s crank pulley
obx 2.5 inch high flow cat
tenrai stainless 2.5 inch cat back exhaust
removed a/c system
removed power steering( hard line and cooler still on car, i have the pump and reservoir as well in storage)
polyurethane lip kit
nsx-s black paint(4 years old..could used touch up in a few spots)
lip spolier
ventvisors
amber removed from tails
vtec 3rd brake light
ebay grill with accord emblem
jdm accord sir stanley headlights with custom yellow highs
amber corners
oem style fogs( stopped working after the swap, not sure why)
tockico illumina 5 way adjustable struts
h&r springs
front and rear strut bars
rear tie bar
stripped trunk
17 inch icw rims
2 falken ziex-512 215-40-17
2 mohawk predator 215-40-17 all 4 tires only a few months old
2 4-way sony xplod 6x9s
2 2way pioneer 6.5
piece of crap dual headunit(stuck open)
ac autotechnic s7 gauges
3 hole gauge pod(no gauges)
theres a bunch of extra sh8t on here because i was looking to trade
1996 accord ex sedan
200k + on car
approx 50k on h23a(pulled from 2000 jdm accord awd sport wagon)
1994 jdm prelude 5 speed tranny(car converted from auto to 5 speed)
exedy stage one clutch
stainless clutch line
weapon r short shift adapter
h22a intake manifold(larger)
h22a throttle body
weapon r secret short ram intake
topspeed 4-2-1 stainless header
jdm obd1 chipped p13 4800 vtec
unorthodox ultra s crank pulley
obx 2.5 inch high flow cat
tenrai stainless 2.5 inch cat back exhaust
removed a/c system
removed power steering( hard line and cooler still on car, i have the pump and reservoir as well in storage)
polyurethane lip kit
nsx-s black paint(4 years old..could used touch up in a few spots)
lip spolier
ventvisors
amber removed from tails
vtec 3rd brake light
ebay grill with accord emblem
jdm accord sir stanley headlights with custom yellow highs
amber corners
oem style fogs( stopped working after the swap, not sure why)
tockico illumina 5 way adjustable struts
h&r springs
front and rear strut bars
rear tie bar
stripped trunk
17 inch icw rims
2 falken ziex-512 215-40-17
2 mohawk predator 215-40-17 all 4 tires only a few months old
2 4-way sony xplod 6x9s
2 2way pioneer 6.5
piece of crap dual headunit(stuck open)
ac autotechnic s7 gauges
3 hole gauge pod(no gauges)
theres a bunch of extra sh8t on here because i was looking to trade
Trending Topics
#12
Honda-Tech Member
iTrader: (2)
Join Date: Jul 2004
Location: PigTown, Germany
Posts: 1,744
Likes: 0
Received 0 Likes
on
0 Posts
check it out the CD Squad https://honda-tech.com/forums/group-threads-123/%2A%2A%2Aofficial-cd-squad-part-iii%2A%2A%2A-1918616/
#17
Honda-Tech Member
Join Date: Jul 2005
Location: San Jose, CA
Posts: 3,623
Likes: 0
Received 0 Likes
on
0 Posts
I agree with this entire post.
Not only does the 'CD' thing itself look stupid, but to anyone who can understand Japanese, the fact that it's supposed to say 'Nagano' and the characters are reversed makes you look like a fool.
http://minkara.carview.co.jp/userid/11774/blog/9011554/
btw, you kept the A/C? I'm not too familiar with H series, but it looks like a compressor in the top right of the engine shot...
Not only does the 'CD' thing itself look stupid, but to anyone who can understand Japanese, the fact that it's supposed to say 'Nagano' and the characters are reversed makes you look like a fool.
http://minkara.carview.co.jp/userid/11774/blog/9011554/
btw, you kept the A/C? I'm not too familiar with H series, but it looks like a compressor in the top right of the engine shot...
#21
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: charlotte, nc, usa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
a/c and power steering are gone, that's just an old pic. thanks for the compliments guys. ill try and put some more pics up soon. an exhaust hanger broke a weld so i took it off to weld it...it'll go back on sunday. ITS LOUD!!!!! i need to get rid of these rims. i rolled on some gunmetal rotas with a polished lip but i traded them for some larger icws for some stupid reason. i guess i was just tired of 16s.