TL-S Cam into 98 v6 honda accord.
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
TL-S Cam into 98 v6 honda accord.
Have anyone try Swapping TL-S cam or CL-S cam into a +98 accord v6 will it fit the 98 V6 accord?? Does this give the car more power gain and can you give me a rough estamate??? I know that You need the front camshaft (Type-S) rear camshaft (Type-S) cam seals (2) valve cover gaskets (2). Do you guys know if the TL-S or CL-S Intake manifold will fit too???
intake valve springs (Type-S). Do you guys also know where I can buy Cheap Acura product???
[Modified by RJonathan, 3:12 AM 4/22/2002]
intake valve springs (Type-S). Do you guys also know where I can buy Cheap Acura product???
[Modified by RJonathan, 3:12 AM 4/22/2002]
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Re: TL-S Cam into 98 v6 honda accord. (Wont be beat)
I dont know that Why I ask.. A local Performance shop told me that TL-S and CL-S cam will fit the J30 engine and give it a slight gain in TQ and Horspower...
#4
Member
Join Date: Mar 2001
Location: Fort Walton Beach, FL, USA
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Re: TL-S Cam into 98 v6 honda accord. (RJonathan)
It is a J series engine so it should work. As for power gains since the Type S motors are calibrated more for power than economy (unlike the Accord V6 motor) the cams should give a power increase just like if you were to add Civic Type R cams to a Civic Si Motor. Same principle really and I have been looking into this oh yeah and putting higher compression ratio pistons into my block as well
Thread
Thread Starter
Forum
Replies
Last Post