Timing belt replacement
08-03-2012, 05:39 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Timing belt replacement
I need to replace my timing belt on my 2002 Honda Accord. Can someone suggest other things to replace while I'm down there? Water pump....
Can someone suggest the tools needed?
I found this good youtube video as well
Paul
Parker, CO
2.3 Liter Accord
http://www.youtube.com/watch?v=KtJQvZ8UcAQ
Can someone suggest the tools needed?
I found this good youtube video as well
Paul
Parker, CO
2.3 Liter Accord
http://www.youtube.com/watch?v=KtJQvZ8UcAQ
08-04-2012, 08:51 AM
#2
Honda-Tech Member
Re: Timing belt replacement
You will also change the balance belt (little belt that routes horizontal under the timing cover). Some replace the water pump while you're in there, but it's not very often they fail.
Chances are, you'll need the 50mm crank lock tool to break the crank bolt loose, Ive rarley got them off with 150psi & 1/2" impact (northern climate rust). Total job usually is 1.5 - 2 hours.
Chances are, you'll need the 50mm crank lock tool to break the crank bolt loose, Ive rarley got them off with 150psi & 1/2" impact (northern climate rust). Total job usually is 1.5 - 2 hours.
Thread
Thread Starter
Forum
Replies
Last Post