GoQkRaCeR

Yesterday was 5 below here in minnesota!!! and i didnt have to much time to look at how i pull my headlight bulbs out of my 98 accord.

is it like most hondas where u just unplug the clip and twist?? i did see 3 bolts on the plug! please tell me i dont have to unscrew them.

Thanks in advance!

TheMuffinMan

iTrader: (1)

There's a black outside plastic ring you have to twist counter clockwise and then you can pull the bulb straight out.

GoQkRaCeR

hmm ill look into it.

ive worked on a few civics where u just pull the black rubber pieces off and press the prong in.

and ive seen lightbulbs where u just twist it and it comes off.

ive tried twisting my honda accord and it wouldnt budge. hmm

banshee4

The twist ring might just be frozen in one spot. I just replaced a bulb and fought the same thing. I ended up using a long ratchet extension to pry on the bump on the ring to get it to twist. Once it broke free it was fine.

TheMuffinMan

iTrader: (1)

The dust covers are only on the H4's/H1's from what I've seen.

My JDM lights have the dust cover (that rubber boot)

100% guarenteed what I told you is correct.

It's a ribbed black piece that fits on the outside of where the bulb is, twist it counter clockwise and it'll free the bulb.

I've had to use a screwdriver more than one occasion to free it