thambi23

hey im on hondapartsdeals.com and im looking for the plastic cover in front on my front fender...i have a cold air intake and when it rains and im driving water hits it..so i dont have the coverage there....can anyone let me nkow the name of the shield and if so how much does it cost....I need them on both sides..

Second question how much does it cost to put on a right side mirror just bought one at a shop? honda dealership tried to make me pay 100$ i was like yea rrright.............let me know people....thanks

TheMuffinMan

iTrader: (1)

It's a fender lining.

Tas Auto has them for like $30 for OEM Honda, you'll also want the clips which are $22 (for 22 of them)

Mirror? Unclip the black triangle thingy on the door panel and unscrew the current one and bolt up the new one.

10 sec install

Heat

I've replaced my splash guard (fender lining) before, one tip for when you put it back in is to park next to a friend / coworker who has the same generation Accord and use it as a guide for how the splash guard is supposed to fit (where it goes, where the clips connect to the car, etc).

With regard to the side mirror, you must have a '98 through '02. You have to take off the door panel to get to a clip that the mirror plugs into. After you remove the door panel, pop off the triangular piece of trim as mentioned above and you'll see three bolts, remove them. I've replaced both of my side mirrors over the years (I have a '99 LX).

dohcvtak

iTrader: (1)

u can get a aftermarket one off ebay for like 17 and go 5 finger the clips at a local auto yard

thambi23

im on manchestrermotorsports.com and i went to hondapartsdeals.com cant find the splash shield can someone get me a link

Heat

What year is your Accord?

Also, what's the trimline, body style, and engine size?

TheMuffinMan

iTrader: (1)

TASAUTO.COM

thambi23

1998 accord v6

Heat

At http://www.manchestermotorsports.com, enter your cars information then go to “Body/AC”, then “Front Fenders”. On the diagram, the splash shield is #5, $37.94 plus shipping / tax (if applicable).

http://www.manchestermotorspor...0.jpg[

But you’ll need the clips too and there are two or three different sizes. For the clips, it may be best to just go to your local dealer and say that you removed your splash shield and want all new clips, see what they give you. Expect to pay between $20 and $30 just for the clips.

http://www.tasauto.com may be cheaper, I’ve never been to the site. For that matter, I’ve never ordered from manchestermotorsports.

thambi23

i see the splash shield on the diagram but does this splash shield cover my cai so it doesnt get wet in the rain??? i need the shield that covers my intake bec as of right now i you can see my cold air intake when you look at my left front wheel

thambi23

...didnt get a reply to the question above...inputs please

SkimN

the fender lining is the plastic that wraps aroung the inner fender abouve the tire, the splashshield goes from the driver side all the way to the passanger side under the bumper, it extends to the fender lining. You want both if you don't have them, check TAS Auto as MuffinMan said, they have all the clips and bolts and it tells you how many you need.