helldriver88

hey guys got a question about the prelude spindles going onto Accords. as some of you may already know, the 90-97 Accord front brakes are what some of us would call fawking retarded. well i've heard of people fixing this inconvenience with 92-96 Prelude spindles. one issue with that. Ball joints. Accord ball joints are too small for prelude spindles and Prelude ball joints are too big for Accord lower control arms. so how are you people getting this to work? bore the hole on the lower control arm by 2mm? or are you guys doing something else??

MAD_MIKE

http://www.cb7tuner.com/vbb/showthre...ake+conversion

https://honda-tech.com/forums/honda-accord-1990-2002-2/diy-rotor-over-hub-conversion-2027047/

Why bother over complicating the hub-over swap out? F23 CL hubs/rotors, Accord bearings done.



Well said JDM_DC4_Fanatic, well said.

helldriver88

woah. so thats how everyone is doing their rotor over hub conversions. i always thought they were using prelude spindles!

poorman212

The acura hubs/spindles are getting hard to find in bone yards, if you look as places like TAS they sell them as well (like $300 last time I looked). I'd call around to bone yards first, just giving other ideas if you cannot find them there.