Not Sure about Valve Clearance... Help me :)
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Riverside, CA, USA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Not Sure about Valve Clearance... Help me :)
Hi guys, well, i finnally looked the head and valves and they were good, i installed everything back, and now the engine runs perfectly, except, i found that i adjusted the valves in the wrong clearance,
Do you guys know what is the clearance of them, the intake and exhaust!
thanks!
Do you guys know what is the clearance of them, the intake and exhaust!
thanks!
#2
Honda-Tech Member
Re: Not Sure about Valve Clearance... Help me :) (zerobacan)
there is a sticker under your hood which says it (at least there is on my car)
in: .009-.011
ex: .011 - .013
Modified by 93cb7sedan at 3:31 AM 1/13/2006
in: .009-.011
ex: .011 - .013
Modified by 93cb7sedan at 3:31 AM 1/13/2006
#4
Honda-Tech Member
Re: Not Sure about Valve Clearance... Help me :) (93cb7sedan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93cb7sedan »</TD></TR><TR><TD CLASS="quote">yes its .26 mm (.010 in) intake and .30mm (.012in) exhuast</TD></TR></TABLE>
what year/model trim? i just did a valve adjustment on my 6th gen and i think it's a tad different
what year/model trim? i just did a valve adjustment on my 6th gen and i think it's a tad different
#7
Honda-Tech Member
Re: Not Sure about Valve Clearance... Help me :) (zerobacan)
in: .009-.011
ex: .011 - .013
so if you do .010 in and .012 ex then you will be the same as my f22a1
ex: .011 - .013
so if you do .010 in and .012 ex then you will be the same as my f22a1
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Riverside, CA, USA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not Sure about Valve Clearance... Help me :) (93cb7sedan)
Thanks everyone... i was using "valve margin" numbers, they showed me to put them btw 0.040 and 0.045. stupid me., now i fixed and the engine sound... perfect!
Yury
Yury
#9
Honda-Tech Member
Re: Not Sure about Valve Clearance... Help me :) (zerobacan)
good news...now come redo mine, i still got mine a little too tight and i hate having to go 30 min to my parents garage to work.
Thread
Thread Starter
Forum
Replies
Last Post