Hi, I have a 91 accord wagon. I'm looking to change my trans fluid, but I'm not sure which plug to fill from? I have read the faq and searched, but my trans seems different.
Here are some pics. Drain?:
All three are square holes, no sign of a hex head.
Also, I have a couple bottles of redline MT90 in the garage, I haven't heard much about using this, I understand the Honda MTF is good, but I have no other use for the MT90... What do you think about using this fluid?
Sealing bolts....#34 and #35 in this pic......not the fill hole for the trans.
The upper sealing bolt "seems" close to the true fill bolt but is higher IMO, so if you don't want to follow the proper procedure and us it.....good luck. Overfill your trans - it is your car. I'd use what the factory wants you to use.
EDIT: Which is #41 in the pic and the same as posted before. again, your car......do as you please.
My child arrived just the other day; he came to the world in the usual way
I can explian it to you, I CANNOT understand it for you
Last edited by Lost Again; 08-20-2012 at 08:53 PM.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.