boredumb

I just failed emissions and went to check my O2 sensor and EGR, the O2 seems to be fine. Then I was going to clean my EGR, but before I got to it, I noticed the hose is not there, I think this might be the cause of my problem. This is on an H22A if that matters.

My question is where am I supposed to connect this to? The part coming out on the right side is what I'm talking about.




Now I've been trying to search and I know that it is Hose #16, and that its supposed to connect to the bottom of the "control unit" I don't know what that is though.

If you can provide pics to, I will you.

nus_dogg

It goes to any Intake Mani nipple for vacuum source.

Or something like this:

aznfreakyguy

it actually goes to the egr control valve

boredumb

Thanks guys. Just to clarify, this is the part it is supposed to connect to?



Then one hose will go out of this and into the Intake Manifold, another will go to the EGR valve?

The wiring is there, so it shouldn't be too difficult.

Edit: Also should I buy the solenoid for an H22 or for an Accord?