mem94043

I have both the OEM and Chilton shop manuals for my 95 Accord LX. It is not clear how to remove injector from fuel rail. I want to replace rubber bits.

Do they just pull out? Are they threaded and you un-screw them? Rail/injectors already off the intake manifold. Just need confirmation on removing injectors from rail. Don't want to break them, so I thought I would ask the Accord gurus here.

Thx!

Mike

shiroun

Pretty sure with all/most honda fuel-rail injectors, just pull out. They should come out pretty easily.

GhostAccord

They are slip fit, no threads. Just pull them out and push them back in. When you go to put them back in you could put a dab of oil/gas/spit around the o-rings to help them slide in. Lubricated is much easier than forcing them in dry.

professorman

YES! In the instructions on here, they didnt not tell the tit bit info about lubricating them. I forced mine in, and ripped it up. Found out on my way home from work the next day when I smell gas. After I got new seals, and lubricate them, they slip right in