ej7attack

anyways ht peers, I have been snagging some parts off of a complete with front end damage 96 Isuzu oasis, ( odyssey). I got my five lug swap almost all together, and may even snag some motor parts if not the whole motor.

I also noticed that the front sway bar was decent size. which pretty much brings me to the question,


has anyone run an ody front sway bar?

I have spent "some" time searching and cannot come up with any good info.
or maybe one of you in here is experienced in the suspension field.
I would assume it would be pretty stiff up front when making turns.

Fitz Williams

iTrader: (1)

Ïf it were larger and it did fit, you would only be making the understeer worse.

Shmallow

agreed.

...unless you're also switching to stiff springs and an equally large rear sway bar. then it would/should balance out.

ej7attack

thanks for your replies

chrisnick

It's just an F22B2 with the F22A6 cam and slightly different tune.

ej7attack

iirc about 10 hp increase?
worth the gains? maybe.. if you needed a replacement, and this motor and ecu was an option on the cheap.

I may just pic up the rest of the van to have the f22b6 and ecu as a spare .
at least I know the van was a run and drive when dude hit a deer. thankfully he is ok.