Front wheel bearing help
#2
Honda-Tech Member
Re: Front wheel bearing help
Have you try to lightly pry up on the sensor using a flat head or some sort? I wouldn't if I'm not comfortable doing that though.
#3
MM Gruppe B
Re: Front wheel bearing help
Try rotating the sensor 90* to break it free from the corrosion. Rotate back and pull out. I would not pry on it if you plan on keeping it as you can snap it off. When reinstalling slather the outside and inside of the bore with anti-seize or grease.
#4
Honda-Tech Member
Thread Starter
Re: Front wheel bearing help
Thanks i have it in oil now i will try this in the morning.
Thread
Thread Starter
Forum
Replies
Last Post
ColeCooper90
Honda Accord (1990 - 2002)
0
01-04-2019 12:35 PM