Exhaust Manifold Torque Spec
#1
Exhaust Manifold Torque Spec
1998 Accord LE 2.3 Liter In Line 4 Cyl.
I have leak in the gasket which I understand ***might*** throw a P0420 Bank 1 code. Should I tighten the bolts near the leak , reset the PCM and see what happens or altogether replace the gasket? If the latter option, what is the torque on the eight manifold bolts. Chilton does not say...
Thanks!
I have leak in the gasket which I understand ***might*** throw a P0420 Bank 1 code. Should I tighten the bolts near the leak , reset the PCM and see what happens or altogether replace the gasket? If the latter option, what is the torque on the eight manifold bolts. Chilton does not say...
Thanks!
#2
Honda-Tech Member
Re: Exhaust Manifold Torque Spec
Tighten them starting from the middle and work your way out. All Data software says 23 ft lbs. I would check the surface of the exhaust manifold and the mating surface on the head using a precision straight edge in case the manifold is warp.
Thread
Thread Starter
Forum
Replies
Last Post
ODbuilt
Honda CRX / EF Civic (1988 - 1991)
8
11-23-2013 07:03 PM
phantomcow2
Honda Accord (1990 - 2002)
2
07-30-2007 05:36 PM