clutch problem on 98 acoord F23
04-20-2007, 12:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Nor Cal, US
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
clutch problem on 98 acoord F23
we finish installing a new clutch on this 98 accord. started up the car, while the car is still on jack stand, shift to gear the wheels spins even with clutch hold all the way down. we bleed out the clutch fluids but doesnt seem like its pumping it out. can this be a bad clutch MC? now the clutch pedal hangs and wouldnt push the slave cylinder.
we did not resurface flywheel. can this be a problem? i wouldnt think so from my past experience.
the old clutch came out broken. not worn out. pads were broken off the clutch itself and includes all the bad smell of burning clutch.
we did not resurface flywheel. can this be a problem? i wouldnt think so from my past experience.
the old clutch came out broken. not worn out. pads were broken off the clutch itself and includes all the bad smell of burning clutch.
04-20-2007, 07:13 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Nor Cal, US
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: (standbackimapro)
yes i know it will spin alittle but while holding the brakes on it will grind before going into gear. will not go into gear easily as well.
Thread
Thread Starter
Forum
Replies
Last Post
