Brake Lamp Warning Stays On
#1
Brake Lamp Warning Stays On
99 Accord v6 Coupe.
Couple of weeks ago I accidentally cracked the center part of my rear brake light assembly on the trunk. Didn't seem major but the brake lamp warning light popped on so I assumed the light wasn't working.
Went to junkyard got another assembly. Installed and tested, the brake lights work fine. But the brake lamp warning is still on.
How do I get the warning light to shut off? I'm don't want to do anything shifty like remove the bulb or fuse.
Thanks.
Couple of weeks ago I accidentally cracked the center part of my rear brake light assembly on the trunk. Didn't seem major but the brake lamp warning light popped on so I assumed the light wasn't working.
Went to junkyard got another assembly. Installed and tested, the brake lights work fine. But the brake lamp warning is still on.
How do I get the warning light to shut off? I'm don't want to do anything shifty like remove the bulb or fuse.
Thanks.
#5
Re: Brake Lamp Warning Stays On
The fact that the 3rd brake light (high mount) is not wired to the failure sensor, means the light you replace probably has nothing to do with the issue.
Are you sure the bulbs (dual filament) in the out brake lights are good?
Are you sure the bulbs (dual filament) in the out brake lights are good?
#6
Re: Brake Lamp Warning Stays On
I find it odd that the warning came on when I damaged the original part and just stays on. I'm tempted to hook the original part back up to see if it was fully functioning. I never even checked I just assumed I busted it and that's why the warning came on. Wasn't until I replaced it that I started to suspect something.
#7
Re: Brake Lamp Warning Stays On
Third/high mount light is the one in the center of the car - in the back window or on the spoiler.
What happens when the headlights are on and you apply the brakes? Remember many of the brake light bulbs a dual element.
What happens when the headlights are on and you apply the brakes? Remember many of the brake light bulbs a dual element.
Trending Topics
#8
Re: Brake Lamp Warning Stays On
Either the warning lamp comes on when the filament is wearing down (and not all the way out) or I was just so fixatedon the center strip I ignored the driver brake light.
I got it fixed now thanks for the help.
Thread
Thread Starter
Forum
Replies
Last Post