91 Accord - ALB control lamp flashes - Module makes weird noise
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: Germany
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
91 Accord - ALB control lamp flashes - Module makes weird noise
I've got following problem on my 91 Accord Sedan:
After I started the engine and drive a few seconds the ALB control lamp starts glowing.
Sometimes, the lamp stays off but then the ALB module makes weird noise, sounds like pumping and when I step on the brake pedal for more than a few seconds the pedal vibrates a few times back and forth....very strange & unsafe feeling.
After I turn off the engine and start again, the ALB lamp glows again.
I already tried to bypass the small blue 2-pin connector under the passenger's side dashboard and check the control lights, without success. Nothing happens....
Anyone an idea?
I already cleaned the wheel sensors & the axle ALB rings.
After I started the engine and drive a few seconds the ALB control lamp starts glowing.
Sometimes, the lamp stays off but then the ALB module makes weird noise, sounds like pumping and when I step on the brake pedal for more than a few seconds the pedal vibrates a few times back and forth....very strange & unsafe feeling.
After I turn off the engine and start again, the ALB lamp glows again.
I already tried to bypass the small blue 2-pin connector under the passenger's side dashboard and check the control lights, without success. Nothing happens....
Anyone an idea?
I already cleaned the wheel sensors & the axle ALB rings.
Thread
Thread Starter
Forum
Replies
Last Post
hookups214
Honda Accord (1990 - 2002)
2
07-21-2008 11:41 PM