Scorpionking

https://www.icloud.com/photostream/#AJ5Uzl7VJPCMFuI'm rebuilding a friends front end. He smashed it up pretty good. I got the radiator support off. Passenger side inner fender a little bent but should move into position for rebuild. The motor mount looks funny to me. What do you think? Photos on icloud https://www.icloud.com/photostream/#AJ5Uzl7VJPCMFu

ja97accord

it does look a little skewed to the right, just to make sure i would go to the junkyard to compare and make sure.

Scorpionking

Thanks, accepting all advice on this one.

Scorpionking

I placed the radiator support in mockup position and threw a couple bolts in the right mount. The left side of the radiator support is short of meeting the mounting location by an entire half inch! So more evidence of that motor mount on the crossmember being out of whack.

Come-a-long the thing back to center? Send it to the junkyard? What do you think? More pictures put on the cloud.

MAD_MIKE

Previous posted pictures are after the fact, would be helpful to see how the car was hit.