gsrjrsc

My mothers car is throwing a code 8 so i have decided to just go ahead and change the distributor. My issue is that i have no idea what one it is. Is it the hitachi or the tec. And is the only difference between the two the fact that one is an internal coil and the other is not?
thanks.

redbull-1

Both Hitachi and TEC made distributors for the Accord EX (with internal coil). Hitachi was what was originally installed in the EX.

TEC was what was originally installed in the LX and DX (with external coil).

As long as you get a distributor for an EX (with internal coil), you are good to go.

Here is a thread with a similar question, which the poster answer himself after he installed it.

https://honda-tech.com/forums/honda-accord-1990-2002-2/distributor-swap-1995-accord-ex-2660606/

GhostAccord

The TDCsensor in a 1996 Accord is not in the distributor. It is located behind the crank pulley mounted to the oil pump housing along with the CKP sensor.

Here is a pic of the two sensors with the crank pulley removed.


TDC is the one on the left and the CKP is on the right.

redbull-1

GhostAccord is correct. I was just answering the question regarding the distributor, not the trouble code.

nus_dogg

Thanks for the good info. I finally know how and where they are located on the 96/97 OBD2 Accords.