1.5 in drop specs -- 98 accord v6?
#1
Thread Starter
Join Date: Nov 2005
Location: newark, nj, usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
1.5 in drop specs -- 98 accord v6?
i have a 98 accord v6 wit eibach springs wit a 1.5 inch drop. i was wondering what the wheel algainnment specs would be on my car ? i also have front and rear camber kits too. anyone wit the same car would have specs cuz i went to my shop to do a wheel algainment and they said they can only do it on factory sotck height, but also said if i bring him the specs he could do the wheel algainment. any body wit suggestions i would apprecaite it ...
#2
Honda-Tech Member
Re: 1.5 in drop specs -- 98 accord v6? (2fast2accord420)
Use the original factory specs (those for the stock height). That's what the Camber kits are for; to bring the suspension Camber value back to the Factory Specs.
Try these:
Toe-in Front:......0.00"
Toe-in Rear:.......0.08" (2.0mm)
Camber Front:... 0.0 degrees
Camber Rear:...-0.25 degrees
Caster Front:..... 3.00 degrees
P
Try these:
Toe-in Front:......0.00"
Toe-in Rear:.......0.08" (2.0mm)
Camber Front:... 0.0 degrees
Camber Rear:...-0.25 degrees
Caster Front:..... 3.00 degrees
P
Thread
Thread Starter
Forum
Replies
Last Post