** The offical 96-00 civic 4dr thread ** PART 2
Honda-Tech Member
Join Date: Aug 2007
Location: Merced,CA
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Lovin' the sticker over the exhaust on the cgp sedan.
Will this thread end after this page?!?! Mayan prophesy....
Will this thread end after this page?!?! Mayan prophesy....
Honda-Tech Member
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Wots up y'all,
I changed my Avatar. Bought some iridium power plugs, worked great for first day, now seem to be lagging, maybe I just got spoiled.
Anyways, I recently changed over to LS Mesh wheels, studs seem to be too short, I guess I'm answering my own question, I need to take the hub out and replace them don't I?
I changed my Avatar. Bought some iridium power plugs, worked great for first day, now seem to be lagging, maybe I just got spoiled.
Anyways, I recently changed over to LS Mesh wheels, studs seem to be too short, I guess I'm answering my own question, I need to take the hub out and replace them don't I?
Honda-Tech Member
iTrader: (1)
Honda-Tech Member
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Wots up y'all,
I changed my Avatar. Bought some iridium power plugs, worked great for first day, now seem to be lagging, maybe I just got spoiled.
Anyways, I recently changed over to LS Mesh wheels, studs seem to be too short, I guess I'm answering my own question, I need to take the hub out and replace them don't I?
I changed my Avatar. Bought some iridium power plugs, worked great for first day, now seem to be lagging, maybe I just got spoiled.
Anyways, I recently changed over to LS Mesh wheels, studs seem to be too short, I guess I'm answering my own question, I need to take the hub out and replace them don't I?
I got some more parts in the mail. School is kicking my *** right now.
I need to find a Greddy TD04h or Nissan T25 so I can boost my car!
Honda-Tech Member
iTrader: (1)
Honda-Tech Member
Join Date: Apr 2011
Location: Jakarta, Indonesia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
hi all
my first post here, want 2 share my daily use grey 96 civic sedan
sorry 4 bad quality of the car n photos
my first post here, want 2 share my daily use grey 96 civic sedan
sorry 4 bad quality of the car n photos
Honda-Tech Member
Join Date: Apr 2011
Location: Jakarta, Indonesia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
does anybody here have seen this kind of 96 civic sedan rear lips? or any other pics of similar model?
(borrowed some pics)
notice the difference from this model
(borrowed pics from my friend)
I already search around the web and found nothing, so please anybody help me.
(borrowed some pics)
notice the difference from this model
(borrowed pics from my friend)
I already search around the web and found nothing, so please anybody help me.
Honda-Tech Member
iTrader: (4)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
top pic looks like a retrofitted accord rear lip and a 96-98 rear bumper
bottom pic has a 99-00 oem lip with 99-00 rear bumper
bottom pic has a 99-00 oem lip with 99-00 rear bumper
Honda-Tech Member
Join Date: Apr 2011
Location: Jakarta, Indonesia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Honda-Tech Member
Join Date: Apr 2011
Location: Jakarta, Indonesia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Honda-Tech Member
iTrader: (2)
Join Date: Aug 2004
Location: Marietta, GA
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
for the last couple of days when I click on the pages, it seems like I'm having a flashback of the last 10 years.... now it's 2012.... lol
Honda-Tech Member
iTrader: (1)
Join Date: May 2004
Location: PA/NC
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Well, here are assorted pictures of my car over the years. When I got the car it was bone stock (and clean). I threw an Iceman intake on, which everyone said looked like a whale pen15, then a Vibrant axle-back. It sounded great at the time and it used to beat my buddies 95 EX coupe :-)
I never had money for wheels in high school so I rocked gold painted hubcaps for a while, then switched to black, and then stopped caring and took them off completely. The car is completely filthy now but with the motor and tranny out, it gives me a great place to start over. Clean the engine bay out really well before the swap goes in, try to piece the dozens of threads I've bookmarked together to finish the swap, and then finally get some wheels for it haha.
Alright, on with the pictures. Apologies if they come out too large or blurry, most of them were taken with a camera phone.
__________________________________________________ __________________________
Local hangout (Sheetz) back in the day
After the OEM front lip install. I've always loved the way the factory lip looks on the 96-98's
Rear wheel lifting up because of the swaybar/ASR brace
And this is the reason I tore my motor out. I was a punk kid and didn't take care of it.. If you've ever played Forza and tried to drive after slamming head-on into a wall, it was kind of like that. The engine started knocking really badly and slowly lost more and more power until I pulled it into the garage for the last time
For a while I was planning on doing a Turbo-D setup. I had (and still have) a boatload of parts for it, but I'm going to sell them in a few months to help fund the ITR swap. This is one of the Vitara pistons I picked up.
Thanks for checking out the pictures! I'm really looking forward to starting up the project when I get home in a few months. Seeing all these clean *** sedans has gotten the gear in my head spinning again so keep your eyes peeled for a rebuild thread.
I just need to find some damn wheels.... Let me know what you guys think: some black Slips, bronze Circuit-10's, some color J-mags (I really love the blue ones but think they may clash), GT3's, etc?
I never had money for wheels in high school so I rocked gold painted hubcaps for a while, then switched to black, and then stopped caring and took them off completely. The car is completely filthy now but with the motor and tranny out, it gives me a great place to start over. Clean the engine bay out really well before the swap goes in, try to piece the dozens of threads I've bookmarked together to finish the swap, and then finally get some wheels for it haha.
Alright, on with the pictures. Apologies if they come out too large or blurry, most of them were taken with a camera phone.
__________________________________________________ __________________________
Local hangout (Sheetz) back in the day
After the OEM front lip install. I've always loved the way the factory lip looks on the 96-98's
Rear wheel lifting up because of the swaybar/ASR brace
And this is the reason I tore my motor out. I was a punk kid and didn't take care of it.. If you've ever played Forza and tried to drive after slamming head-on into a wall, it was kind of like that. The engine started knocking really badly and slowly lost more and more power until I pulled it into the garage for the last time
For a while I was planning on doing a Turbo-D setup. I had (and still have) a boatload of parts for it, but I'm going to sell them in a few months to help fund the ITR swap. This is one of the Vitara pistons I picked up.
Thanks for checking out the pictures! I'm really looking forward to starting up the project when I get home in a few months. Seeing all these clean *** sedans has gotten the gear in my head spinning again so keep your eyes peeled for a rebuild thread.
I just need to find some damn wheels.... Let me know what you guys think: some black Slips, bronze Circuit-10's, some color J-mags (I really love the blue ones but think they may clash), GT3's, etc?
Honda-Tech Member
Re: ** The offical 96-00 civic 4dr thread ** PART 2
^ what turbo D-series parts do you have? I might be interested. Gonna go do my black housing headlights, be back in 5 hrs
Honda-Tech Member
Re: ** The offical 96-00 civic 4dr thread ** PART 2
If you wanna see the video from import alliance, check out fortin31's YouTube account and my video is the only one up. It's the only one named IA2011. Lol
Can't link for the fact I'm on my iPod. Lol
Can't link for the fact I'm on my iPod. Lol
Honda-Tech Member
iTrader: (1)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
All 4 of them
also on Thursday the lip & grill will be on the car finally i hate the car without a front lip looks lol IMO
also on Thursday the lip & grill will be on the car finally i hate the car without a front lip looks lol IMO
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2007
Location: Bay Area, CA
Posts: 4,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
we made it through 2012
Those are OEM Honda optional skirts made for 96-00 4drs if I am correct? Keep me posted SpideR just in case you change your mind
You can only rock 99-00 rear mudguards on our sedans if you have a 99-00 rear bumper with 99-00 OEM rear lip. 96-98 rear mudguards dont work with rear lips.
GAG! I'm getting ready to spray paint my roof, cuz it looks like ****, and that's all I can afford right now. Unless my interview at Honda goes well. LoL Anyway, I was wondering how I should do it to get the best out of it. Any ideas? Also have any of u used a rear lip with rear mudguards? Im getting a rear lip from RareSpirits soon hopefully, and I wanna rock both. Any info is appreciated! Thanks guys!
Honda-Tech Member
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Love the bumper Portflow! I will be your 96-98 twin one day
Got my headlights done, not sure if I want to seal it yet as I have everything to do my retrofit except for projectors. Going with Mini H1's
Got my headlights done, not sure if I want to seal it yet as I have everything to do my retrofit except for projectors. Going with Mini H1's