T4 twin scroll 4 into 1 merge collector design help
#1
T4 twin scroll 4 into 1 merge collector design help
I have no experience from the actual fabrication of it.
need insight from fabricators.
Is my design right?
i placed a 3mm thick(red) plate between the ports to separate the exhaust gases., i know for fact that these should not merge in a twinscroll design
attached are the pictures.
need insight from fabricators.
Is my design right?
i placed a 3mm thick(red) plate between the ports to separate the exhaust gases., i know for fact that these should not merge in a twinscroll design
attached are the pictures.
#4
Re: T4 twin scroll 4 into 1 merge collector design help
Thankyou so much aluthman! how many lbs of boost are you running?
i found this on youtube
i found this on youtube
Last edited by carlowerks; 10-17-2016 at 06:03 AM.
#5
Re: T4 twin scroll 4 into 1 merge collector design help
Right now I'm still on the base tune at about 23psi. Eventually I'll end up in the high 20s or low 30s depending on how the turbo responds. EFRs don't like being overspun, so I have to be careful.
Thread
Thread Starter
Forum
Replies
Last Post
rice a roni
Forced Induction
1
03-21-2013 06:12 AM
digitalcongo
Classifieds: Forced Induction
2
11-11-2006 12:07 PM
Willard
Road Racing / Autocross & Time Attack
15
08-05-2003 07:23 AM