New Plugs B16A EJ1
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Michigan
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
New Plugs B16A EJ1
I want to get new plugs but I am torn on which ones to get. Everybody knows that NGK's are the best. I just dont know if I should get:
-NGK Laser Series Iridium (IFR6E11)
-NGK Laser Series Platinum (PFR6L-13)
-NGK IX Iridium (BKR6EIX-11)
Also what gap should I run? Stay with the stock gap of .052? Any help would be much appreciated.
-NGK Laser Series Iridium (IFR6E11)
-NGK Laser Series Platinum (PFR6L-13)
-NGK IX Iridium (BKR6EIX-11)
Also what gap should I run? Stay with the stock gap of .052? Any help would be much appreciated.
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Michigan
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Plugs B16A EJ1
I did some research and I have seen a few people saying they run with either a .030 or .044 gap. My B16A is not completely stock. Basic bolt ons, Megan Header, 2.5" Blitz exhaust, AEM Ram Air. P30 ECU.
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Michigan
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Plugs B16A EJ1
I wasn't asking which plugs, which plugs out of the ones on my list. I don't want to run copper plugs when Iridium's or Platinum's are just a few bucks more.
#6
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Michigan
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Plugs B16A EJ1
Why? I know theres not much point in running iradium plugs in my engine but they are only a couple bucks more so why not. What about the gap, stock gap of .052?
Thread
Thread Starter
Forum
Replies
Last Post
sir222
Honda Civic / Del Sol (1992 - 2000)
7
09-16-2006 07:51 AM