Gunns

Here is the deal,

I have a 92 CX Hatch with a 95 JDM GSR in it. It has a USDM stock Type r header installed as the stock one was too short to reach the cat. Now a friend want to trade my projector headlights for his DC 4-2-1 2 piece ceramic header. It is coming off a 97 Integra GS.

My question is, will it be the same length as the type R, so it will bolt up no problem? Will it flow the same and the one made for the GSR? Is the only difference in the headers the length? They all the same diameter?

Here is what I found from searching!


All Integras have the same length header, EXCEPT for the 94-99 GS-Rs (which are shorter).

So yes, the ITR/LS/GS/RS/SE and 00-01 GS-R headers are all the same length.

(FWIW, the 94-99 GS-R cat converter is a different size too)


Please confirm this info!

Kurt

Gunns

What no help?

Gunns

bump

HT Chaplain

Call DC up there real friendly and would be glad to answer your questions!

Gunns

Thats a good idea

Ditdogs

keep the jdm 4-1 dc headers and go to a shop and have them fab up a | | size piece to connect the header to the exhaust pipe and you will be golden.

4-2-1 headers

Gunns

Ditdogs,

Did you even read what I posted? That makes no sense!

Kurt