GSR blocks, R interior, 3.2 TL longblock, other stuff
06-08-2003, 07:37 PM
#1
Thread Starter
Join Date: May 2002
Location: Albemarle, NC, USA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
GSR blocks, R interior, 3.2 TL longblock, other stuff
I need to get rid of some of this stuff:
OBD II 1.8 GSR shortblock...I have disassembled this engine, under visual inspection, the crank is not scarred beyond repair, just a couple of slight scratches which should polish/turn out. ASKING $500.00
93 1.7 GSR...I have this disassembled as well. This was a customer's engine that someone else built. The cylinder walls are slightly uneven due to not boring, only hand honing. I mic'ed each cylinder, and I feel the easiest way to correct this problem would be to install an 82mm piston. This block has JDM type R pistons that are brand new, which I will separate if someone needs them. The crank is perfect. ASKING $450.00
OBD1 GSR block, needs to be sleeved due to broken rod: ASKING $175.00
2002 3.2 TL-S full V6 longblock, make an offer....
2 K series longblocks, make an offer
Endyn Spec roller wave high comp wiseco pistons 81.5 mm, 5k miles: $300.00
USDM type R interior, front and rear seats, mint condition: $950.00
Brand new DC ceramic header for DX Accord: $280.00
4 sets 92+ Prelude axles: $150.00/set
10 D series vtec heads...make an offer
5 LS valvecovers: $60.00/piece
10 stock B series flywheels: $30.00/piece
25 D series shift linkages: $20.00/piece
TONS of D series axles, all years, what do you need??
email jspeed2000@yahoo.com
OBD II 1.8 GSR shortblock...I have disassembled this engine, under visual inspection, the crank is not scarred beyond repair, just a couple of slight scratches which should polish/turn out. ASKING $500.00
93 1.7 GSR...I have this disassembled as well. This was a customer's engine that someone else built. The cylinder walls are slightly uneven due to not boring, only hand honing. I mic'ed each cylinder, and I feel the easiest way to correct this problem would be to install an 82mm piston. This block has JDM type R pistons that are brand new, which I will separate if someone needs them. The crank is perfect. ASKING $450.00
OBD1 GSR block, needs to be sleeved due to broken rod: ASKING $175.00
2002 3.2 TL-S full V6 longblock, make an offer....
2 K series longblocks, make an offer
Endyn Spec roller wave high comp wiseco pistons 81.5 mm, 5k miles: $300.00
USDM type R interior, front and rear seats, mint condition: $950.00
Brand new DC ceramic header for DX Accord: $280.00
4 sets 92+ Prelude axles: $150.00/set
10 D series vtec heads...make an offer
5 LS valvecovers: $60.00/piece
10 stock B series flywheels: $30.00/piece
25 D series shift linkages: $20.00/piece
TONS of D series axles, all years, what do you need??
email jspeed2000@yahoo.com
Trending Topics
06-12-2003, 05:24 PM
#8
Thread Starter
Join Date: May 2002
Location: Albemarle, NC, USA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: GSR blocks, R interior, 3.2 TL longblock, other stuff (SBR*EG4)
To anyone trying to contact me, I have not been available for the past few days because my dad was in the hospital, please bare with me and I will post some pics this weekend.....
K series, I have 2 longblocks out of RSX-S.....
I have some H22 stuff also, what are you looking for??
K series, I have 2 longblocks out of RSX-S.....
I have some H22 stuff also, what are you looking for??
Thread
Thread Starter
Forum
Replies
Last Post