MitsuToodles

I am open to offers on all of this. I have wiring harness for B18 as well. Only thing it needs it what it says the body needs. If looks for swap you'll need clutch kit, axles, and ecu. The motor currently has an automatic tranny on it, you could easily remove and sell and get some $$$ in pocket from that. Here is the info.

I am selling a 1993 Civic EX Coupe. Full bodykit. Primered.

Power everything.
Grey cloth/Black Interior panels

Needs:
No stereo
Sunroof replaced (installed still but cracked, doesn't leak)
Windshield (Previous windshield removed. Been covered so interior is good. No water inside)
Front Seats (Had racing seats installed but removed by previous owner)

Good project car is looking to do Auto X or Drag car.

Also selling:

Acura B18A1 Engine JDM (30,000 mile motor)
Displacement (cc): 1834
Power (bhp@rpm): 130 @ 6,000 rpm
Torque (ft/lbs@rpm): 121 @ 5,000 rpm
Compression Ratio: 9.2:1
Bore (mm): 81
Stroke (mm): 89
Cam Design: DOHC

As well as....

Y80 (USDM GSR 5spd Transmission)

This transmission is found in all USDM GSR's. Although LSD was not offered these transmissions are still highly sought after because of their stronger differentials and optimal gearing. For those not interested in ultra-short gearing this transmission provides the perfect balance between acceleration and top end. Look to pay around 700-1000 for these transmissions.

The specs are the same as above:

1st: 3.230
2nd: 1.900
3rd: 1.360
4th: 1.034
5th: 0.787
Reverse: 3.000


Feel free to email me or call me with any questions on anything listed above. Trying to sell fast due to be in need of cash at the moment and need to finish other project.

Email: GSX99Eclipse@msn.com
Phone: (509) 366-5478

If by some chance you call and I cannot get to the phone please leave a message with name and number and I will get back to you asap. I check my email off and on all day so expect a response pretty quick.

Thanks