F/S: Fully built PR3 b16 head
12-17-2002, 02:33 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Southern cali or boston
Posts: 5,699
Likes: 0
Received 0 Likes
on
0 Posts
F/S: Fully built PR3 b16 head
This is a crvtec/lsvtec prep'd head, only has 30 miles on it!
It is in immaculate condition, im forced to sell do to financial problems
Ill let the pictures do the talking
I just wish i had the money to finish my crvtec project
I have many more things to sell
I will make a giant garage sale when i take pictures of it all
JDM 2000 CRV block (valve reliefs enlarged) PHK pistons!!! motor has around 5k miles on it, comes factory with knock sensor, same as b20Z motor!
GSR ARP head bolts, brand new
ITR port and polished intake manafold
hondata intake manafold gasket
ITR throttle body gasket
ITR throttle body(less than 5k miles)
new B20 headgasket
new LS/B20 timing belt
new oil pan gasket
aem fuel rail silver
aem fpr silver
skunk2 silver cam gears brand new never open'd
YS1 tranny with no US miles on it
There is more stuff, ill list it all when i take pics
Anyway, for the head, i would like 1000 firm
If you are intrested in my entire setup PM me or email and we can work out a package price.
Specs:
Crower dual valvesprings
Part # 68185
http://www.crower.com/cgi-bin/detail.cgi?prod_id=68185
Crower 5.5g titanium retainers
Part # 87093
http://www.crower.com/cgi-bin/detail.cgi?prod_id=87093
Manley Racemaster stainless steel valves
http://www.importperformanceparts.ne...hondacura.html
Intake 11374-8 Int. 33.5 mm 5.5 mm 102.4 Pro Flow: 22° x 5/16"
Exaust 11375-8 Exh. 28.5 mm 5.5 mm 102.7 25° x 11/32"
Along with new valve guides, fresh valve job, hot tank'd, and resurfaced (not milled)
[Modified by sirhatchback, 1:10 PM 12/17/2002]
[Modified by sirhatchback, 11:52 PM 12/17/2002]
It is in immaculate condition, im forced to sell do to financial problems
Ill let the pictures do the talking
I just wish i had the money to finish my crvtec project
I have many more things to sell
I will make a giant garage sale when i take pictures of it all
JDM 2000 CRV block (valve reliefs enlarged) PHK pistons!!! motor has around 5k miles on it, comes factory with knock sensor, same as b20Z motor!
GSR ARP head bolts, brand new
ITR port and polished intake manafold
hondata intake manafold gasket
ITR throttle body gasket
ITR throttle body(less than 5k miles)
new B20 headgasket
new LS/B20 timing belt
new oil pan gasket
aem fuel rail silver
aem fpr silver
skunk2 silver cam gears brand new never open'd
YS1 tranny with no US miles on it
There is more stuff, ill list it all when i take pics
Anyway, for the head, i would like 1000 firm
If you are intrested in my entire setup PM me or email and we can work out a package price.
Specs:
Crower dual valvesprings
Part # 68185
http://www.crower.com/cgi-bin/detail.cgi?prod_id=68185
Crower 5.5g titanium retainers
Part # 87093
http://www.crower.com/cgi-bin/detail.cgi?prod_id=87093
Manley Racemaster stainless steel valves
http://www.importperformanceparts.ne...hondacura.html
Intake 11374-8 Int. 33.5 mm 5.5 mm 102.4 Pro Flow: 22° x 5/16"
Exaust 11375-8 Exh. 28.5 mm 5.5 mm 102.7 25° x 11/32"
Along with new valve guides, fresh valve job, hot tank'd, and resurfaced (not milled)
[Modified by sirhatchback, 1:10 PM 12/17/2002]
[Modified by sirhatchback, 11:52 PM 12/17/2002]
12-17-2002, 09:07 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Southern cali or boston
Posts: 5,699
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: Fully built PR3 b16 head (integracon)
the cams are just stock cams.
as for the rest
the head is ported and the rest of the parts used are listed below, it is ls/crvtec prep'd
all the machine work is absoultely flawless
Crower dual valvesprings
Part # 68185
http://www.crower.com/cgi-bin/detail.cgi?prod_id=68185
Crower 5.5g titanium retainers
Part # 87093
http://www.crower.com/cgi-bin/detail.cgi?prod_id=87093
Manley Racemaster stainless steel valves
http://www.importperformanceparts.ne...hondacura.html
Intake 11374-8 Int. 33.5 mm 5.5 mm 102.4 Pro Flow: 22° x 5/16"
Exaust 11375-8 Exh. 28.5 mm 5.5 mm 102.7 25° x 11/32"
Along with new valve guides, fresh valve job, hot tank'd, and resurfaced (not milled)
as for the rest
the head is ported and the rest of the parts used are listed below, it is ls/crvtec prep'd
all the machine work is absoultely flawless
Crower dual valvesprings
Part # 68185
http://www.crower.com/cgi-bin/detail.cgi?prod_id=68185
Crower 5.5g titanium retainers
Part # 87093
http://www.crower.com/cgi-bin/detail.cgi?prod_id=87093
Manley Racemaster stainless steel valves
http://www.importperformanceparts.ne...hondacura.html
Intake 11374-8 Int. 33.5 mm 5.5 mm 102.4 Pro Flow: 22° x 5/16"
Exaust 11375-8 Exh. 28.5 mm 5.5 mm 102.7 25° x 11/32"
Along with new valve guides, fresh valve job, hot tank'd, and resurfaced (not milled)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
quick1racer
For Sale
24
01-29-2006 09:13 PM
drunknbass
Classifieds: Forced Induction
8
04-28-2005 02:02 PM
