CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
04-22-2015, 09:24 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Southern, Cali, US
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
California 626 (east SGV Covinas). Pickup or ship your choice, though probably don't want to ship the big stuff since you pay S&H. You pay the paypal, if you want to do that or cash. Feel free to make offers if you're serious and have cash.
Looks like I'm leaving the Honda scene with many fond memories and looking to part with my beloved EM1. I was original and only owner. Salvage title (Theft recovery, of course) and also threw a rod blew the engine and never got it really running again. Not parting out stock parts at this time since a few people are interested in the whole chassis but if those don't go through, will update the thread.
Mint black JDM ITR Recaros with DC2 rails - lowered to $900
never smoked in (only smoke Cigars now and then and never in the car), no tears. Some wear marks is about it.
5 x SSR Competition 17 x 7.5. $1000
I have two extra center caps and all the stickers. I have a couple of the valve stems around here somewhere but they seem to be hiding right now. I have a full sized spare to clear my AEM big brakes. Bought the DD new off tire rack for 375 each. Spare(s) were bought second off of someone used after a wreck (I actually bought TWO but one ended up being bent - It was on my garage wall as a lesson learned - if you want it, make an offer). The spare isn't in great shape but the rest are fairly mint. They were DD and a couple were slightly curbed. Tires are Proxes 4 in 20540ZR17 but probably need to be replaced though may be usable for the short term anyway.
EK9 / Momo steering wheel $300 and gauge cluster $300 or the pair for $500. Cluster pending
EK9 shift boot with Honda 5-speed aluminum shift ****
EK9 valve cover & oil cap $200
K&N FIPK (with EO sticker and a new filter) $175
Mugen front strut tower SOLD.
Throttle body (stock), intake manifold, head, etc make offers.
complete top end: 750
complete bottom end: 500
s4c transmission: 500
whole long block and tranny 1200, you do the wrenching or 1500 if I do it.
Transmission was always perfect never tinkered with. Clutch should be good, too. Block as mentioned threw at least one rod but no loud visible bangs or puddles.
EK9/power folding mirrors purchased from Super Autobacs. I sourced the relay and switch from either evilbay or Craigslist but never found a way to do the wiring in a way I liked. $300 takes the lot
SRR LCA's. SOLD
I have some rather cloudy EK9 headlights that I never got around to buffing but refinished my OEM ones perfectly. SOLD
I have the sidemarkers mint and an ICB (I think?), too that I never wired up. I also have all my stock parts, including the seats, steering wheel/airbag/cruise control, intake, cat back, and shocks/springs. Stock lip with a bunch of busted clips available, too. I need to get these down from the rafters and take pics. Hood is great. Trunk has some holes /grommets for WW Commando spoiler I had on there, which is also available. If someone wants the chassis, I'd part with that too. I would entertain offers for the whole enchilada, as well. Make offers on whatever you want/need
Mugen SS Lip. SOLD
Mugen Twin loop scrapes on bottom - SOLD
Random pictures:
Looks like I'm leaving the Honda scene with many fond memories and looking to part with my beloved EM1. I was original and only owner. Salvage title (Theft recovery, of course) and also threw a rod blew the engine and never got it really running again. Not parting out stock parts at this time since a few people are interested in the whole chassis but if those don't go through, will update the thread.
Mint black JDM ITR Recaros with DC2 rails - lowered to $900
never smoked in (only smoke Cigars now and then and never in the car), no tears. Some wear marks is about it.
5 x SSR Competition 17 x 7.5. $1000
I have two extra center caps and all the stickers. I have a couple of the valve stems around here somewhere but they seem to be hiding right now. I have a full sized spare to clear my AEM big brakes. Bought the DD new off tire rack for 375 each. Spare(s) were bought second off of someone used after a wreck (I actually bought TWO but one ended up being bent - It was on my garage wall as a lesson learned - if you want it, make an offer). The spare isn't in great shape but the rest are fairly mint. They were DD and a couple were slightly curbed. Tires are Proxes 4 in 20540ZR17 but probably need to be replaced though may be usable for the short term anyway.
EK9 / Momo steering wheel $300 and gauge cluster $300 or the pair for $500. Cluster pending
EK9 shift boot with Honda 5-speed aluminum shift ****
EK9 valve cover & oil cap $200
K&N FIPK (with EO sticker and a new filter) $175
Mugen front strut tower SOLD.
Throttle body (stock), intake manifold, head, etc make offers.
complete top end: 750
complete bottom end: 500
s4c transmission: 500
whole long block and tranny 1200, you do the wrenching or 1500 if I do it.
Transmission was always perfect never tinkered with. Clutch should be good, too. Block as mentioned threw at least one rod but no loud visible bangs or puddles.
EK9/power folding mirrors purchased from Super Autobacs. I sourced the relay and switch from either evilbay or Craigslist but never found a way to do the wiring in a way I liked. $300 takes the lot
SRR LCA's. SOLD
I have some rather cloudy EK9 headlights that I never got around to buffing but refinished my OEM ones perfectly. SOLD
I have the sidemarkers mint and an ICB (I think?), too that I never wired up. I also have all my stock parts, including the seats, steering wheel/airbag/cruise control, intake, cat back, and shocks/springs. Stock lip with a bunch of busted clips available, too. I need to get these down from the rafters and take pics. Hood is great. Trunk has some holes /grommets for WW Commando spoiler I had on there, which is also available. If someone wants the chassis, I'd part with that too. I would entertain offers for the whole enchilada, as well. Make offers on whatever you want/need
Mugen SS Lip. SOLD
Mugen Twin loop scrapes on bottom - SOLD
Random pictures:
Last edited by Uxi; 08-14-2015 at 07:57 PM. Reason: clarify OBO and Mugen
04-23-2015, 09:23 AM
#7
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Southern, Cali, US
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
Has all hoses and harnesses and wiring, etc. Getting a bunch of messages, so hope I didn't miss anyone
Trending Topics
04-23-2015, 12:21 PM
#8
Honda-Tech Member
Join Date: Apr 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
I would like to pick some part up from you.. I stay in Gardena Ca . Can you email me your address or phone number ..
Pozworks@gmail.com
Still new to this site
Pozworks@gmail.com
Still new to this site
04-23-2015, 06:50 PM
#9
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Southern, Cali, US
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
Probably not without agreement before hand. At least not yet.
Transmission and intake pending
Transmission and intake pending
04-24-2015, 07:16 AM
#13
Honda-Tech Member
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
I'm in Ohio but I would take that shell off your hands bro. I'm not bullshitting you. Give me a fair price on the shell, knowing it's got to get shipped out here. You can keep all the odds and ends stuff that will make you some $$, I'm just looking for a clean shell.
If you don't want to deal with selling the shell. I'll buy the whole front end. I specially need the fenders, but I'll buy the whole lot bro.
Send me a PM and I can give you my personal contact info.
If you don't want to deal with selling the shell. I'll buy the whole front end. I specially need the fenders, but I'll buy the whole lot bro.
Send me a PM and I can give you my personal contact info.
04-24-2015, 07:46 AM
#14
Honda-Tech Member
Join Date: Jan 2008
Location: S. California, CA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
Located in So Cal too ...
How much for the following:
EM1 brake booster + master cylinder combo and 4040 prop valve?
Mugen SS lip??
Door panels?
Feel free to PM me back prices and contact number thanks.
How much for the following:
EM1 brake booster + master cylinder combo and 4040 prop valve?
Mugen SS lip??
Door panels?
Feel free to PM me back prices and contact number thanks.
04-28-2015, 08:56 PM
#23
Honda-Tech Member
iTrader: (19)
Join Date: Dec 2008
Location: NORCAL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
re: CA - 2000 EM1 EBP Car, Mugen, JDM ITR Recaro, EK9, etc
You never responded to my pm. How much shipped to 95969 for the rear T bracket and drivers post mount?
Last edited by rollinmyda; 04-28-2015 at 09:56 PM.
