DMF

I am considering a final drive for my H4 Del Sol. I was wondering what experience has been had with different ratios and companies. Also, where did you get it from or where have you seen them? There seems to be a shortage of companies selling them for single cam engines.

trigun7469

pm'ed you

creechrr

I'm running a SRR 4.9 in my 95 hatch (street car).

The change in FD made a huge difference in the acceleration of the car. It tops out at about 120mph.

Lyonel 13H4

I use the 4.7 SRR final drive sourced from Will at exospeed.com in my 95 civic ex. (Thanks Will!) Installation was straightforward and it works flawlessly. Very happy. Just please tell him Lyonel sent ya!

BTW, they are also an excellent source for Bisimoto headers and anything else you need for your 1.6 sohc...

Evs-One

I actually just threw in my 4.9 FD Saturday after work. Took about 2 1/2 hours to drop the tranny, install, and get it running again.

By far the best mod I have done to the drivetrain. The D series lacks BIG time in the gearing category. We put down the same, if not better torque numbers than a B16, but their superior gearing will always get us...not anymore

jsi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Emerika &raquo;</TD></TR><TR><TD CLASS="quote">I actually just threw in my 4.9 FD Saturday after work. Took about 2 1/2 hours to drop the tranny, install, and get it running again.

By far the best mod I have done to the drivetrain. The D series lacks BIG time in the gearing category. We put down the same, if not better torque numbers than a B16, but their superior gearing will always get us...not anymore </TD></TR></TABLE>

It's not just about the gearing. Unless your D can rev to 8500-9000RPM, Bs will still own. While you grab the next taller gear and sacrifice torque multiplication for speed, they still got another 1500-2000rpm of pull left...

jsi

Oh yeah, and to answer the original question, they can be had from:

http://www.opmautosports.com/

http://www.housemanautosport.com/prod05.html

http://www.exospeed.com/

JOEY F.

Im not too sure if this FD will fit but its an option for us 4th gen civic/crx guys.

Its a 4.73 FD from ATS and they go for about 899 shipped here in the sponsor forum (At least thats what i was quoted)----&gt; https://honda-tech.com/zerothread?id=899514

heres a pic..

Mr Hammond

This is what I will be installing in my H4 90 Si. Unfortunately AFAIK it will not work in the hydro trans cases. Everyone that I know with a 92-00 Hydro D-Series trans run one of the SRR variants.


Jim - who is still patiently waiting the arrival of his coated Bisi header. :sigh: One day...........

temp

ATS does make a FD for the L3 tranny (cable), as posted above

owen_the_soyboy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lyonel 13H4 &raquo;</TD></TR><TR><TD CLASS="quote">I use the 4.7 SRR final drive sourced from Will at exospeed.com in my 95 civic ex. (Thanks Will!) </TD></TR></TABLE> just ordered a 4.7 for my new sohc vtec mini-me motor!

Tyson

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JOEY F. &raquo;</TD></TR><TR><TD CLASS="quote">Im not too sure if this FD will fit but its an option for us 4th gen civic/crx guys.

Its a 4.73 FD from ATS and they go for about 899 shipped here in the sponsor forum (At least thats what i was quoted)----&gt; https://honda-tech.com/zerothread?id=899514

heres a pic..
</TD></TR></TABLE>

please clarify, will this fit in a CRX Si L3 tranny?

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyson &raquo;</TD></TR><TR><TD CLASS="quote">

please clarify, will this fit in a CRX Si L3 tranny?</TD></TR></TABLE>

it looks like the pic found here

http://www.a-t-s-usa.com/ats-p...shtml

Johnny Mac

Unfortunately, the B16's still own us H4 D16's even with the FD. However, if you build an H1 D16 to the full letter of the rules, then the above statement doesn't necessarily hold.

JOEY F.

oh boy...a D16 H1 car? That would be a sight to see...especially if it wins.

Johnny Mac

This D16 actually raced and was doing quite well, like 3rd place for awhile until an accident occured. However, this particular D16 was not totally built to the letter of the rules, so there is some more ponies in that single cam. It should be interesting to see when this beast gets up to speed.

sporkcrx

Good lord those are expensive

Johnny Mac

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">Good lord those are expensive </TD></TR></TABLE>

What the motor or the accident?

ONEcam

iTrader: (1)

Wil@exospeed

Johnny Mac

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HarvardBlueHB &raquo;</TD></TR><TR><TD CLASS="quote">Wil@exospeed</TD></TR></TABLE>

?

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">Good lord those are expensive </TD></TR></TABLE>


uh.....no? thats the average price for just about any quality FD

sporkcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by temp &raquo;</TD></TR><TR><TD CLASS="quote">


uh.....no? thats the average price for just about any quality FD</TD></TR></TABLE>

uh.....yes. I wasn't comparing it other FD's, just in general.

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">

uh.....yes. I wasn't comparing it other FD's, just in general.</TD></TR></TABLE>


lol, well there is a saying that my friend passed on to me "i cant afford the cheap ****".......i hope you understand the full ramifications of that statement

sporkcrx

haha, indeed I do.

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">haha, indeed I do. </TD></TR></TABLE>