D16Z6 1.6L SOHC VTEC swap :: South Central Pennsylvania
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: 40.201N, 77.189W, PA
Posts: 4,738
Likes: 0
Received 7 Likes
on
4 Posts
D16Z6 1.6L SOHC VTEC swap :: South Central Pennsylvania
NOT ACCEPTING TRADES. WILL NOT SHIP. Please don't PM me about trading anything or shipping prices.
1992 Honda D16Z6 engine, trans, mounts (minus AC mount), axles, shift linkage, shifter, engine harness included.
Only upgrade is the Skunk2 intake manifold. Doesn't come with a header, and the oil pan has a barb fitting for an oil return line, so either get something to plug that or it'll need another oil pan as well (yes, it was boosted on 220 whp but you'll see that it is healthy further down). Could use a valve cover seal for the 4th cylinder spark plug tube. It leaks some oil down in there.
About 120K-130K miles on the motor. 210 compression on all four cylinders. Didn't do a leak down test since compression was good.
Transmission grinds 3rd above 5000 rpm. And also has an input shaft bearing going out.
$450
1992 Honda D16Z6 engine, trans, mounts (minus AC mount), axles, shift linkage, shifter, engine harness included.
Only upgrade is the Skunk2 intake manifold. Doesn't come with a header, and the oil pan has a barb fitting for an oil return line, so either get something to plug that or it'll need another oil pan as well (yes, it was boosted on 220 whp but you'll see that it is healthy further down). Could use a valve cover seal for the 4th cylinder spark plug tube. It leaks some oil down in there.
About 120K-130K miles on the motor. 210 compression on all four cylinders. Didn't do a leak down test since compression was good.
Transmission grinds 3rd above 5000 rpm. And also has an input shaft bearing going out.
$450
Thread
Thread Starter
Forum
Replies
Last Post