designa_ridez

hey guys since im new to the forum im a noob

long story short im new to the K this being the first swop i want to do but this is what i went and bought..

COMPLETE k24a3 motor, 6 speed box, ecu etc, got this complete out of rolled accord, wanted to get the complete Hasport swop kit with what evers needed and have it swapped into an ek hatch..

*Can i get a k20 head and swop it straight on to this block rev and 8k? (or have to swop out oil pump etc) since it being the lazy effiency motor

* will i be waisting my time throwing in a shorter final drive in to this long *** ratio standard accord box? (learnt from the dc2 itr makes lil hp but power is in the box)

* should i try and sell this whole swap and get a k20 one instead? or just drop this whole stock one in? prob is i want the 24 bottom end but gota sell one to get the next as no loose subs are available here in my crap country no one heres really done a k swap or had any first hand experience with it..

please don't shoot i just need advice being new to the K scene and want to pull this off and get ordering in the next week.. You guys advice appreciated

chewyv

south africa?? thats far far away...k 2 0 . o r g...i/m and wiring if your thinking k20/24

bzyq2001

in SA and in EU k24a3 it's like k24a2 in US, it's 190hp so keep this engine it has similar head to k20a2 but with 'weeker' cams

designa_ridez

And I was just about to sell it lol, from the specs on the k24a3 its seem exact as to the k24a2 wonder if anyones had any experience using this motor, hoping the pistons are the same as found in the k24a2 whereby the k20 head would go straight on.. Really don't wana strip out these pistons